(2) JBL JRX212 1000w 12" 2-Way DJ P/A Speakers+(2) 18" 1400w Subwoofers Pro Subs

• (2) JBL JRX212 1,000 Watt 12" Inch 2-Way DJ P/A Speaker Floor Wedge Monitor - NEW!
• (2) JBL Pro JRX218S 1,400 Watt 18" Inch Compact Passive Subwoofer DJ Sub
• (2) Rockville RSP36 36" Mounting Pole from Subwoofer to Speaker, Heavy Duty Steel

Authorized JBL Dealer!

Features of JRX212:

• JBL Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker
• JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil
• JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver
• Advanced network topology crossover design
• High-voltage capacitors and inductors with massive cores and heavy gauge wire
• Progressive Transition™ high frequency waveguide
• 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure
• SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles
• 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10°

Specifications:

• Power Rating : 250 W RMS / 1000 W Peak
• Frequency Range (-10 dB) : 60 Hz - 20 kHz
• Frequency Response (±3 dB) : 80 Hz - 18 kHz
• Sensitivity (@1m) : 98 dB SPL (1w/1m)
• Nominal Impedance : 8 ohms
• Recommended Amplifier Power : 250 W to 500 W into 8 ohms
• Maximum SPL : 128 dB
• Nominal Dispersion : 90º x 50º
• Crossover Frequency : 2.1 kHz
• Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in)
• Weight : 19.5 kg (43 lb)
• High Frequency Driver : JBL 2414H-C 1" exit compression driver mounted on Progressive Transition™ Waveguide
• Low Frequency Driver : JBL M112-8
• Input Connectors : Neutrik® Speakon® NL-4 (x1); .25 in
• TS phone jack (x1); parallel
• Grille : 18-gauge, powder-coated steel
• Mounting & Suspension : 36 mm, dual-angle pole-mount socket

Authorized JBL Dealer

Features of JRX218S:

• JRX218S 18" Compact Subwoofer
• 18 in. compact subwoofer.
• 350 W (continuous), 1400 W (peak) power capacity.
• Enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) and is carpeted in black
• Top mounted, cast aluminum 36 mm pole mount receptacle for the optional SS3BK pole to facilitate use of the JRX218S as a base for a mid-high speaker cabinet.
• Non-resonant, all steel handles
• 18-gauge perforated steel grille

Details:

• Power Rating : 350 W / 1400 W
• Frequency Range (-10 dB) : 34 Hz - 250 Hz
• Frequency Response (±3 dB) : 53 Hz - 250 Hz
• Sensitivity (@1m) : 98 dB
• Nominal Impedence : 4 ohms
• Recommended Amplifier Power : 350 W to 700 W into 4 ohms
• Maximum SPL : 133 dB peak, @1 m (3.3 ft)
• Dimensions (H x W x D) : 605 mm x 508 mm x 551 mm (23.8 in x 20.0 in x 21.7 in)
• Net Weight : 32.2 kg (71 lb)
• Low Frequency Driver : M118-4
• Input Connectors : Neutrik® Speakon® NL-4 (x2); parallel
• Grille : 18-gauge, powder-coated steel

How to Set Up your RSP36:

Features of RSP36:

• Rockville RSP36 36“ Mounting Pole from Subwoofer to PA Speaker 
  
• 200 Lb Load Capacity
• 36" Mounting Pole
• Pole diameter: 1.38" inches (35mm)

Row content