2) Rockville 10" Subwoofers+Sub Enclosure Box For 2007-2016 Jeep Wrangler 4-Door

$702.98 $319.85 Save 55%
Shipping calculated at checkout.
Product Description
Package Includes:
  • (2) Rockville W10K6D2 V2 10" 2000w Car Audio Subwoofer Dual 2-Ohm Sub CEA Compliant
  • (1) Rockville (2) 10" Subwoofer Sub Enclosure Box For 2007-2016 Jeep Wrangler 4-Door
  • (1) Dual Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spade Terminals

Video of W10K6D2 V2:


  • Rockville W10K6D2 V2 K6 Series 10" Dual 2-Ohm Car Subwoofer
  • Peak Power Handling: 2000 Watts
  • Program Power Handling: 1000 Watts
  • CEA Rated RMS Power Handling: 500 Watts
  • 2.5" Voice coils (Black Aluminum Former Wound with 100% OFC Copper Wire
  • The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer
  • Double Stacked 100 Oz High Quality Magnet
  • Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient
  • Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone
  • Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
  • Red Stitching Cone Reinforcement Ensures Long Life
  • Polypropylene (PP) Dustcap
  • Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
  • Impedance: Dual 2-Ohm Voice Coils
  • Vented Hole on T-yoke Enhances Heat Dissipation
  • Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
  • Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
  • High BL Magnetic Motor Gap
  • We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
  • Cutout Diameter: 9.41” inches
  • Mounting Depth: 5.29” inches
  • Frequency Response: 36.7 Hz - 1.5K kHz
  • 8mm T-Yoke + 8mm Washer
  • Sensitivity: 85dB
  • Sealed Enclosure Volume: 0.6 – 1.1 Cubic Feet
  • Vented/Ported Enclosure Volume: 1.1 – 1.6 Cubic Feet
  • Weight: 16.53 Lbs.
  • Shipping Weight: 19.84 Lbs.
  • Shipping Box Dimensions: 13.58" x 13.58" x 12.6" Inches
  • XMAX:20 MM (One way)

Detailed Info:

  • Body: Non-Pressed Paper
  • Gap Plate Inside Diameter: 80mm (3.14 inches)
  • Gap Plate Outside Diameter: 156mm (6.14 inches)
  • Gap Plate Thickness: 20mm (0.8 inches)
  • Yoke Outside Diameter: 145mm (5.71 inches)
  • Yoke Thickness: 8mm (0.31 inches)
  • Yoke Pole Diameter: 60mm (2.4 inches)

TS Parameters:

TS Parameter Wired in Series Wired in Parallel Description of Measurement

Electrical Parameters


4.32 Ohm

1.09 Ohm

Electrical voice coil resistance at DC


5.32 mH

1.047 mH

Frequency independent part of voice coil inductance


6.32 mH

1.412 mH

Para-inductance of voice coil


8.09 Ohm

2.04 Ohm

Electrical resistance due to eddy current losses


641.37 µF

2573.92 µF

Electrical capacitance representing moving mass


25.48 mH

6.38 mH

Electrical inductance representing drive compliance


45.72 Ohm

11.24 Ohm

Resistance due to mechanical losses


39.4 Hz

39.3 Hz

Drive resonance frequency

Mechanical Parameters (Using Laser)


203.494  g

201.259 g

Mechanical mass of drive diaphragm assembly including air load and voice coil

Mmd (Sd)

196.785 g

194.549 g

Mechanical mass of voice coil and diaphragm without air load


6.939 kg/s

6.956 kg/s

Mechanical resistance of total-drive losses


0.08 mm/N

0.082 mm/N

Mechanical compliance of drive suspension


12.45 N/mm

12.25 N/mm

Mechanical stiffness of driver suspension


17.812 N/A

8.843 N/A

Force factor (Bl product)

Lambda s



Suspension creep factor

Loss Factors




Total Q-factor consider all losses




Mechanical Q-factor of of drive in free air considering Rms only




Electrical Q-factor of drive in free air considering Re only




Total Q-factor considering Re and Rms only

Other Parameters


12.2205 l

12.4184 l

Equivalent air volume of suspension




Reference efficiency (2 pi-radiation using Re)


82.4 dB

82.39 dB

Characteristic sound pressure level (SPL at 1m for 1W @ Re)


82.06 dB

88.03 dB

Nominal sensitivity (SPL at 1m for 1W @ Zn)


327.9 cm²

327.9 cm²

Diaphragm area




Efficiency bandwidth product



  • 1" MDF Face, 3/4" for the rest
  • Gold Tipped Spring Loaded Terminals
  • Premium Charcoal Colored Carpet


  • Air Space: 1.6 Cubic Feet (per sub)
  • Mounting Depth: 10"
  • Height: 13.25"
  • Width: 36"
  • Depth: 16.25"
  • Tuning Frequency: 39 HZ

Complete Dual Subwoofer Enclosure Installation Kit!


  • 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 20 Feet of 14 AWG Blue Speaker Wire
  • 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

Shipping & Returns

Row content