Crown Pro XLi800 600w 2-Channel DJ/PA Power Amplifier Amp + Cables XLI 800
Product Description
- (1) Crown Pro XLi800 600w 2 Channel DJ/PA Power Amplifier Professional Amp XLI 800
- (2) Rockvile RCSS1610 10' 16 AWG Speakon to Speakon Speaker Cable 100% Copper
Authorized Crown Audio Dealer!
Description:
Powerful. Reliable.
Affordable.
The XLI Series of power amplifiers from Crown represents a new era in
affordable, quality power amplification. All four models in the series are
powerful, rugged and reliable. They are suited for musicians, DJs, and
entertainers as well as houses of worship, discos, and pubs.
Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.
Features:
- Crown Pro XLi800 600 Watt 2-Channel DJ/PA Power Amplifier
- RMS Power @ 4 Ohms: 300 Watts x 2 Channels
- RMS Power @ 8 Ohms: 200 Watts x 2 Channels
- RMS Power @ 8 Ohms Bridged: 600 Watts x 1
- Frequency Response: 20 Hz - 20 kHz
- THD: <0.5%
- Distortion: <0.35%
- Slew Rate: >10V/us
- Voltage Gain: 29 dB
- Damping Factor: 8 Ohms, 10 Hz to 400 Hz
- Signal to Noise Ratio (A-Weighted): >100 dB
- Crosstalk: -75 dB, -59 dB
- Input Sensitivity: 0.775V or 1.4V
- Input Impedance: 20k Ohms, 10k Ohms
- AC Line Voltage and Frequency Configurations: (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz
- IEC Power Connector: 15A
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Efficient forced-air cooling prevents excessive thermal buildup
- Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio-frequency interference
- Product Dimensions: 19" x 3.5" 12.4" inches
- Product Weight: 25.1 Lbs.
Authorized Rockville Dealer!
Video of RCSS1610:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCSS16-10 16 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
- 100% Copper Conductors for Lower Resistance
- Black PVC Jacket for Both Durability and Flexibility
- Intended for High-Current Applications Only, Not Line-Level Signals
- Length: 10 Ft
- Gauge: 16
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
Shipping & Returns
Row content
