JBL VMA1120 Commercial/Restaurant 120W 70v Amplifier+(6) JBL White 6.5" Speakers

$1,451.00 $1,084.80 Save 25% Sold out
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) JBL VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs
  • (3) Pairs of JBL CONTROL 16C/T 6.5" 30w 70v Commercial Ceiling Speakers For Restaurant/Bar

Authorized JBL Dealer!

Each speaker has a tap switch that you can select 3.8w/7.5w/15w/30w. This amplifier is 120 Watts make sure you do not exceed 100 watts in total

Video of VMA1120 :

Features:

  • JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs
  • 5-Input Mixer
  • Supports USB Drives and Bluetooth
  • 120W, 1-Output Amplifier
  • Euroblock, RCA, and 1/4" Inputs
  • Euroblock Outputs
  • Per-Channel Bass and Treble Controls
  • Voice-Activated Ducking
  • Front-Panel Display and Controls
  • Configurable Output Routing
  • Includes Rack Mount Kit

Specifications:

  • Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms
  • Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.
  • Input Channels: 5
  • Output Channels: 1
  • Tone Control: Bass and Treble non-detented potentiometers on each channel
    • Bass: ±14 dB @ 50 Hz
    • Treble: ±14 dB @ 10 kHz
  • Input Sensitivity:
    • Mic Input: 5.5 mVrms
    • Line Input: 1.3 Vrms
    • RCA Input (Stereo In): 130 mVrms
  • Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output
    • 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB
    • 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB
  • Total Harmonic Distortion (THD): Power Amp Output: <0.5%, 20 Hz to 20 kHz
  • Signal to Noise Ratio: >76 dB
  • Input Impedance:
    • Mic: 400 Ohms
    • Line: 20k Ohms
    • RCA: 50k Ohms
  • Phantom Power: 27 VDC
  • Crosstalk: -70 dB
  • Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz
  • Minimum Load Impedance:
    • Low Impedance Output: 4 Ohms
    • 70 V Output: 40 Ohms
    • 100 V Output: 80 Ohms
  • Operating Temperature: 32°F to 95°F
  • Humidity: 95% RH
  • Storage Temperature: -4°F to 185°F
  • Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches
  • Product Weight: 20.2 Lbs.


Video of CONTROL 16C/T:

Description:

Two-Way 6.5" Coaxial Ceiling Loudspeaker

Control 16C/T is a full-range ceiling speaker consisting of a 165 mm (6.5 inch) high tech cone driver and a 19mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blindmount backcan for quick and easy installation.

Features:

  • (2) JBL CONTROL 16C/T 6.5" 30 Watt 70v Commercial Ceiling Speakers For Restaurant/Bar
  • Components:
    • 165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround
    • 19 mm (0.75 in) soft-dome liquid-cooled tweeter
  • Blind-mount backcan for quick and easy install
  • Dual conduit/cable clamps
  • Combined 70V/100V and low impedance direct operation
    • 50 Watts at 8O nominal setting
    • 30W multi-tap at 70V/100V
  • 62 Hz – 20 kHz bandwidth with wide 110° coverage
  • High 91 dB sensitivity for high maximum SPL
  • Color: White

Specifications:

  • Frequency Range (-10 dB): 62 Hz – 20 kHz
  • Power Capacity (at low-Z)
    • 100 Watts Continuous Program Power
    • 50 Watts Continuous Pink Noise
  • Transformer Taps: 30 W, 15 W, 7.5 W @ 70V or 100V (plus 3.8 W @ 70V only)
  • Frequency Response (±3 dB): 96 Hz – 15 kHz
  • Nominal Sensitivity: 91 dB
  • Nominal Coverage Angle: 110° conical coverage
  • Directivity Factor (Q): 7.8
  • Directivity Index (DI): 8.2 dB
  • Rated Maximum SPL: 108 dB @ 1 m (3.3 ft) average, 116 dB peak
  • Nominal Impedance: 8 ohms (in direct/bypass 8O setting)
  • Crossover Network
    • 12 dB/oct (2nd order) low-pass to LF driver,
    • 12 dB/oct (2nd order) high-pass to HF driver
  • LF Driver: 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil
  • HF Driver: 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide
  • Input Connector: Removable locking 4-pin connector with screw-down terminals.
    Max wire size 12 AWG (2.5 mm2)
  • Connector Wiring: Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru
  • Strain Reliefs: Strain relief for two cables or two flex conduits via coupled clamping mechanism
  • Materials: ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated 
    steel backcan
  • Safety Agency: UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems
  • Dimensions
    • 253 mm diameter x 225 mm depth from back of baffle
    • (10.0 in diameter x 8.8 in depth)
  • Ceiling Cutout Size: Circular cutout with 223 mm (8.8 in) diameter (cardboard cutout
    template included)
  • Ceiling Thickness Range: Up to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 60 mm (2.4 in) ceiling thicknesses
  • Safety Seismic Attachment: One point, top surface
  • Net Weight: 3.4 kg (7.4 lbs, one speaker)
  • Shipping Weight: 11.2 kg (24.7 lbs, pair in master carton)
  • Included Accessories: C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, removable locking multi-pin connector, grille
  • Optional Accessories
    • MTC-26NC new construction bracket
    • MTC-26MR mud-ring construction bracket
    • MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in, ordering one set = 24 dog-ears for 6 speakers) 
    • MTC-48TR tile rail for 1200 mm (4 ft) tile spans
Shipping & Returns

Row content