KICKER 6.75" Tower Speakers+8" Subwoofer+Enclosure+(2) Amps 4 RZR/ATV/UTV/Cart

Package Includes:

• (1) Kicker 41KMT674 6-3/4" 6.75" 300W RMS Marine Wakeboard Tower Speakers KMT67
• (1) Kicker 45CWTB84 8" 600w Marine Loaded Subwoofer Enclosure+Passive Radiator TB8
• (1) MB Quart NA2-320.4 320w RMS 4-Channel Amplifier Amp 4 Polaris RZR/ATV/UTV/Cart
• (1) Rockville RXM-T1 1500 Watt Peak/750w RMS Marine/Boat 2 Channel Amplifier Amp New

---

Audiosavings can only ship Kicker products to the United States.  Sorry, but we can not ship Kicker to Canada or United Kingdom.

Here at AudioSavings we strongly believe that Kicker is the BEST brand in the Car Audio Industry. We are so confident that you will be happy with your Kicker purchase from us that we will offer you the following guarantee. We GUARANTEE you will be more than satisfied with the sound and value of any Kicker products purchased from us. We urge you to buy this product; test it; and if it doesn’t meet your standards; send it back to us within 90 Days and we’ll give you a 100% FULL REFUND (or store credit). We’ll even give you a return shipping label to ship it back to us!!!

There are no restrictions to this guarantee, other than you must send back the same item we sent you along with the any included accessories.

---

Description of 41KMT674:

The KMT67 consists of dual 6-1/2-inch woofers which flank a unique exponential horn-loaded tweeter, integrated into two stylish, injection-molded ABS enclosures that intensify and carry the music across the water from any aquatic cruiser’s tower. Horn-loaded tweeters deliver long-range output and superior dispersion control. The six total speakers provide twice the cone area of a traditional coaxial tower system for ultimate volume.

The enclosures are designed for either below- or above-the-bar mounting. Billet-aluminum mounting brackets and clamp inserts adjust to seven common sizes, matching most every wake tower or roll-bar diameter. Each enclosure is also designed with a five-way, binding post hook-up on the back for added stability. The system includes stainless-steel mounting hardware.

The KMT67 is a full-range, high-quality two-way speaker system specifically designed for the boat captain, his crew and fun-seekers at the end of a tow rope. The tower system adds yet another level to the diverse selection of audio gear for watercraft produced by the legend in mobile audio.

The KMT67 is weather-proof with sealed cones and motor assemblies, while the titanium-dome tweeters are protected by dense, open-celled foam. All components are UV-treated for improved resistance against the sun’s rays and the harsh marine environment.The speakers come with grilles that can be removed for a different aesthetic appeal.

Features:

• Kicker 41KMT674 6.75" Marine Wakeboard Tower Speakers
• Power Rating :
• Peak Power : 600 Watts (300 Watts per Speaker)
  
• RMS Power : 300 Watts (150 Watts per Speaker)
• Weather-proof
• Horn loaded compression-driver with titanium diaphragms component system
• Full-range
• Injection-molded enclosures for below- or above-the-bar-mounting
• Dual midrange drivers
• Horn-loaded tweeters for long-range output and superior dispersion  control
• Adjustable billet-aluminum mounting brackets with clamp inserts for  popular tube sizes (1-5/8”, 1-3/4”, 1-7/8”, 2, 2-1/4”, 2-3/8”, 2-1/2”)
• KB6000 indoor/outdoor full-range enclosures for patio, RV’s, etc.

---

What's In The Box:

• (1) Enclosure Assembly
• (2) Vertical Mounting Brackets
• (1) Horizontal Mount Base
• (1) Horizontal Mount Hook (Retainer)
• (1) Horizontal Mount Plate (Retaining Clamp)
• (7) Stainless Steel M5 X 12mm Button Head Screws For Horizontal Mount Plate To Base And Mounting Brackets To Enclosure
• (11) Nylon Flat Washers (To Be Used On All Mounting Fasteners)
• (4) Stainless Steel Pan Head Phillips M4 X 25mm (For Mount Base To Vehicle)
• (1) Owner’s Manual
• (2) Kicker Stickers
   

Description of 45CWTB84:

Ultra-deep and surprisingly loud, TB subs mount in your trunk or your truck with equal ease. You get the bump you want without losing the space you need. This TB Eight-Inch Tube Speaker works best with 300 watts of recommended power.

Features:

• KICKER 45CWTB84 8" 600w Marine Loaded Subwoofer Enclosure + Passive Radiator TB8
• RMS Power Handling: 300 Watts
• Peak Power Handling: 600 Watts
• Four Ohm Speaker
• Thick ABS Tube Construction
• Flexible Horizontal or Vertical Mounting System
• Spring-Loaded Speaker Terminals
• CompR Woofer and Reflex Sub
• Ceramic Magnet
• Advanced Heat Management System
• Signature Double Red Stitching
• Box Bottom Depth: 12.88" inches
• Impedance: 4 Ohms
• Box Height:
  • Vertical Mount: 13.44" inches
  • Horizontal Mount: 8.63" inches
• Box Width: 8.5" inches
• Sensitivity: 84.4 dB 1w/1m
• Grilles Included
   

Click here for the Owner's Manual

---

Description of NA2-320.4:

MB Quart compact Four Channel, 400 watt Powersports amplifier with on-board equalization and simple installation with quick release connectors.

Features:

• MB Quart NA2-320.4 320w RMS 4-Channel Amplifier 4 Polaris RZR/ATV/UTV/Cart
• Marine Grade Protection
• Pre-Amp Circuitry: The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
• Inputs: 2 Pair, High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
• Four channel operation
• Complete control of amplifier signal, essential when using two or more amplifiers
• Full Range Class D: High efficient circuit topology which helps the amplifier develop a lot of power in a very small heatsink
• Stable power through the PC board with minimal heat generation
• Aluminum Heat Sink: Quickly dissipates heat to allow the amplifier to run lower impedance for longer duration
• Simpatico Coil Design: The dual coil pulse width modulated power supply keeps voltage constant through the Ultra-Fi output devices
• Output Connections: Quickly remove amplifier when you are putting machine up for the winter as a security precaution
• Gold plated power, ground, speaker and RCA corrosion resistant connections
• Diagnostics: Monitor thermal, overload, DC and speaker short protection with lighted indicators on the amplifier end panel
• Water resistant for durability in any environment

Click here to see the Owners Manual

Specifications:

• Certifications: Marine and Powersports
• Variable Voltage: 0.2V-0.9V
• Signal to Noise Ratio: >90dB
• Frequency Response: 20Hz - 20kHz
• Bass Boost: 0-12dB at 45Hz
• Power at 2-Ohms: 4 x 80W
• Power at 4-Ohms: 4 x 40W
• Total Channels: 4
• Audio Inputs: RCA
• Dimensions: 3.70" x 5.51" x 1.77" in (9.4 x 14.0 x 4.5 cm)
• Weight 2.16lbs (0.98kg)

---

Video of RXM-T1:

Unboxing Video for RXM-T1:

 

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market and of course at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

The RXM-T1 is a 2 channel marine amplifier with 1,500 Watts peak output and 500 Watts MS (2x 250 @ 4 Ohms). You can also bridge the amplifier and get 1 x 750 Watts RMS @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their items using the CEA standard such as Kicker, Rockford, Alpine, etc.

The RXM-T1 has a conformal coating on its PCB (printed circuit board) in order to protect against moisture, dust, chemicals, and temperature extremes. This coating protects the amplifier from the elements of the ocean. If water gets sprayed on the amplifier you will not have to worry. The exterior screws are made of stainless steel to better withstand the elements. This amplifier is fully marine-rated from start to finish.

One of the tricks to determine the real power of an amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. RXM-T1 features a 50 Amp Maxi Fuse. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXM-T1 you are getting your money’s worth and then some.

This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. This amplifier is completely universal. It can be installed to any marine system.

Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 channel / bridgeable mono model, mute and delay soft start technology, and a crossover band-pass control. The RXM-T1 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.

We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).

Features:

• Rockville RXM-T1 1500 Watt Peak / 750 Watt RMS Marine 2 Channel Amplifier
• CEA Compliant Power Ratings:
• 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N
• 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD
• 1 x 370 Watts bridged @ 4 Ohms < 1% THD
• RMS Power Ratings:
• 750 Watts (2 x 375 Watts RMS) @ 2 ohms
• 1 x 750 Watts @ 4 ohm Bridged Mono

Row content