Kicker L7S124 12" Solo Baric L7S Car Subwoofer+Rockford Fosgate Amplifier+Wires
Product Description
- (1) Kicker L7S124 12" 1500 Watt Solobaric L7S Car Subwoofer Solo-Baric
- (1) Rockford Fosgate R750-1D 750 Watt Rms Class D Mono Amplifier Car Amp
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
Authorized Kicker Dealer!
Description of 44L7S124:
Square Matters
The Solo-Baric revolves around KICKER's most advanced cone design, the injection-molded SoloKon™. The 360-degree, constant-contact back bracing adheres directly to every contour of the square cone, adding targeted strength, reliable performance and accurate response for the super-clean bass you’ve been looking for.
Features:
- Kicker L7S124 12" 1500 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S12-4
- Dual Four-Ohm Voice Coils
- Injection-Molded Polypropylene Cone
- Patented Corner Ribs Minimize Distortion
- SoloKon™ 360-Degree Back Bracing
- Ribbed Santoprene Surround With Blue Surround Stitching
- UniPlate™ Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
- Thick Tinsel Leads
- Large Ceramic Magnet
- Cast Aluminum Basket
- Satin-Nickel Plated, Spring-Loaded Speaker Terminals
- The Solo-Baric L7S 12-Inch Subwoofer works best with a sealed or ported enclosure and 750 watts of recommended power. See below for more details.
Specifications:
- Size: 12" (30.5 cm)
- Impedance: 4 Ohms DVC
- Max Rec Amplifier Power: 1500 Watts Peak / 750 Watts RMS
- Sensitivity: 88.6 dB 1w/1m
- Frequency Response: 20Hz - 100Hz
- Mounting Depth: 6-11/16" (16.9 cm)
- Mounting Cutout, Square: 11-1/16" (28.1 cm)
- Min Rec Sealed Box Volume: 0.88 cu. ft. (24.9 liters)
- Max Rec Sealed Box Volume: 2.0 cu. ft. (56.6 liters)
- Min Rec Vented Box Volume: 1.75 cu. ft. (49.6 liters)
- Max Rec Vented Box Volume: 3.25 cu. ft. (92.1 liters)
Features of R750-1D:
- Variable crossover 12dB/octave slopes
- 4 Gauge power/ground terminals
- Cast aluminum heatsink
- Infrasonic filter
- RCA pass-thru
- Top mounted controls
- Tri-stage protection covers thermal, over-current and short circuits
- On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
- CEA-2006 Compliant
- Number of Channels: 1
- RMS Power Handling:
- 400 Watts x 1 @ 4-Ohms
- 600 Watts x 1 @ 2-Ohms
- 750 Watts x 1 @ 1-Ohm
- Total Power (Sum of RMS Power): 750 Watts
- Low-Pass Crossover Controls: Variable 50Hz - 500Hz @ 12dB/Octave
- Tone Controls: 0dB to +12dB @ 45Hz
- Low Level Signal Input: 1 RCA Pair
- Signal Output: 1 RCA Pair
- Power Input Connector: Block
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Block
- Speaker Wire Gauge: 12 AWG
- Remote Controls: Variable 0dB to +12dB @ 45Hz
- Visual Indicators:
- Power
- Protect
- Circuit Topology Class: Class-D
- Dimensions (H x W x L): 2" x 6.7" x 9.1"
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Shipping & Returns
Row content
