Mackie 1402VLZ4 14-channel Analog Mixer w/4 ONYX Preamps+DI Box+Cable+(3) Mics
Product Description
- (1) New Mackie 1402VLZ4 14-channel Compact Analog Low-Noise Mixer w/ 6 ONYX Preamps
- (1) Rockville RDI5 DI Box Converts Guitar/Instrument Signal to Balanced Line Level
- (1) Rockville RCXMB10B 10' Male REAN XLR to 1/4'' TRS Cable Black 100% Copper
- (1) Rockville RMC-3PK 3 Pack Metal Wired Vocal/Instrument/DJ Microphones+Metal Case
Authorized Mackie Dealer!
Video of 1402VLZ4:
Description:
UNMATCHED PERFORMANCE
Each generation of VLZ mixers benefits from a reinvestment in performance, all without raising prices. By continuing to ignore the “race to the bottom,” VLZ4 benefits from generations of performance improvements like transparent EQ, class-leading negative summing bus architecture and custom-designed op-amps to ensure signal integrity from every input to every output. The result is a mixer that is at the peak of performance and is the obvious go-to compact analog mixer for engineers who demand professional results.
ONYX PREAMPS
The performance of Mackie’s Onyx mic preamps is more than proven. Just check all the amazing reviews and customer testimonials. Their boutique quality sound and unmatched performance rival any high-priced, boutique preamp on the market. Adding these flagship preamps to our VLZ4 Series compact mixers underlines our commitment to continually improving the performance of the VLZ line with each generation.
HIGH HEADROOM / LOW NOISE
The VLZ4 design goal was simple: every VLZ4 mixer must have the highest headroom and lowest noise possible. Strict attention to component quality and tolerances has led to innovations like our custom M80 op-amps and class-leading negative summing bus architecture that add yet another level of assurance that a Mackie VLZ4 mixer is the right choice for your professional audio application.
BUILT LIKE A TANK
Mackie VLZ mixers are truly “Built-Like-A-Tank.” From beer spills to drops from moving vehicles, the testimonials are as endless as the applications Mackie mixers serve. The VLZ4 series is certainly no exception. With a nearly indestructible steel wrap-around chassis and features like grime-resistant rotary sealed pots, you can be sure that buying a Mackie VLZ4 mixer is a solid investment.
VLZ4’s new black powder coat finish, cockpit-inspired controls and high-contrast knobs not only optimize your mixer’s usability in low-light scenarios, it also means your mixer looks as good as it performs.
COMPREHENSIVE AND PROVEN
Mackie’s VLZ4 line is extremely comprehensive, offering mixers of every channel count, every price point, for every application. From the ultra-compact 402VLZ4 for desktop applications to the tour-friendly 3204VLZ4, you can be sure there is a VLZ4 mixer with the right feature set for your needs.
Features:
- Mackie 1402VLZ4 14-channel Compact Mixer
- 14-channel mixer featuring Mackie signature high-headroom/low-noise design
-
6 boutique-quality Onyx mic preamps
- Ultra-wide 60dB gain range
- 128.5 dB dynamic range
- +22 dBu line input handling
- Extended frequency response
- Distortion under 0.0007% (20Hz – 50kHz)
- Improved RF rejection perfect for broadcast applications
- Phantom power for condenser mics
- 14 high-headroom line inputs with +4/-10 operation control
- 3-band EQ (80Hz, 2.5kHz, 12kHz)
- 18 dB/oct 75Hz low-cut filter on mic input channels
- 2 aux sends, level, pan and PFL solo on each channel
- 60mm long-wearing log-taper faders
- 2 stereo returns for connecting FX processor or other stereo source
- ALT 3/4 stereo bus for added routing flexibility
- Control room / phones source matrix
- High-resolution 12-segment stereo meters
- Sealed rotary control resist dust and grime
- “Built-Like-A-Tank” rugged steel chassis with powder-coat finish
- High-visibility, high-contrast controls deliver convenient “at-a-glance” visual feedback
- Rack-mountable design using optional rack ear kit
- Multi-voltage power supply for worldwide use
Details:
- Main Mix Noise
- (20 Hz–20 kHz bandwidth, 1/4" main out, channels 1-6 gain @ unity, channel EQs flat, all channels assigned to main mix, channels 1, 3 and 5 panned left, 2, 4 and 6 panned right.)
- Main mix fader down, channel faders down: –101 dBu
- Main mix @ unity, channel faders down: –91 dBu
- (95 dB Signal to Noise Ratio, ref +4 dBu)
- Main mix fader @ unity, channel faders @ unity: –86 dBu
- Total Harmonic Distortion (THD): (1 kHz @ 35 dB gain, 20 Hz–20 kHz bandwidth) Mic pre @ insert <0.0007%
- Attenuation / Crosstalk
- (1 kHz relative to 0 dBu, 20 Hz–20 kHz bandwidth, line in, 1/4"main out, gain @ unity)
- Main mix fader down: –100 dBu
- Channel Alt / Mute switch engaged: –90 dBu
- Channel fader down: –90 dBu
- Frequency Response (Mic input to main output (gain @ unity)
- +0, –1 dB, 20 Hz to 50 kHz
- +0, –3 dB, <10 Hz to >100 kHz
- Equivalent Input Noise (EIN)(Mic input to insert send out, max gain)
- 150 ohm termination –128.5 dBu, 20 Hz–20 kHz
- Common Mode Rejection Ratio (CMRR)
- 1 kHz better than –70 dB
- Maximum Levels
- Mic in: +22 dBu
- Tape in: +16 dBu
- All other inputs: +22 dBu
- Main mix XLR out: +28 dBu
- All other outputs: +22 dBu
- Impedances
- Mic in: 2.5 k ohm
- Channel insert return: 2.5 k ohm
- All other inputs: 10 k ohm or greater
- Tape out: 1.1 k ohm
- All other outputs: 120 ohm
- EQ
- High Shelving: ±15 dB @ 12 kHz
- Mid Peaking: ±15 dB @ 2.5 kHz
- Low Shelving: ±15 dB @ 80 Hz
- AC Power Requirements
- Power Consumption: 25 watts
- US, JP: 100 – 120 VAC, 50 – 60 Hz
- EU, UK, AU, CN: 200 – 240 VAC, 50 – 60 Hz
- Operating Temperature: 0° – 40°C, 32° – 104°F
- Fuse Rating
- 100-120V 500 mA slo blo, 5 x 20 mm
- 220-240V 250 mA slo blo, 5 x 20 mm
- Physical Properties (product): 12.5" x 3.2" x 14"
- Weight 9.5 lb / 4.5 kg
- Physical Properties (packaged product): 6.9" x 16.1" 15.2"
- Weight 12.0 lb / 5.4 kg
- Best prices - We sell all Mackie Products at the lowest price as possible.
- Full Factory Warranty
- Detailed information of all products
- Lifetime Customer Service by Mackie Product Experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Mackie from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
How to set up your RDI5:
Video of RDI5:
What makes ours better:
- Larger transformer deliver true 600 ohm output
- Thick steel chassis for reliable performance
- 50K ohm parallel link jack enables you to connect the output from the RDI5 directly to power amplifiers without a separate pre-amplifier
- Matches the signal level and impedance with unity gain, with no adverse effects on the source signal
- Connect your electric guitar or bass to a mixer or recording interface
- Connect your keyboards directly to a mixer or recording interface
- Convert a DJ mixer that is unbalanced to a balanced signal
- Allows you to feed effects directly to your mixer. The RDI5 has the capability to accept speaker level inputs from a power amplifier’s output. This allows eq and effects signals to be fed directly to the console.
- Rockville RDI5 Passive DI Box - Converts Guitar/Instrument or other Signal to Balanced Line Level
- Switchable input attenuation
- 0dB for electric guitar and bass pickups
- -20dB for line level signals, such as keyboards and cd players
- -40dB for speaker feeds
- Input Connectors: 1/4" TRS Jack connectors
- Output Connector: XLR Connector
- 50K ohm instrument input
- 50K ohm parallel link jack
- Matches the signal level and impedance with unity gain, with no adverse effects on the source signal
- 600 Ohm XLR output jack - enables you to send a balanced signal to a mixer
- We use a transformer that is 2-3 times larger than most other ones on the market to give you true 600 ohm output
- The 50K ohm parallel link jack output enables you to connect the output from the RDI5 directly to power amplifiers without a separate pre-amplifier
- Switchable ground lift to help eliminate hum caused by ground loops
- Thick steel Chassis is sturdy and strong
- Frequency Response: 10 Hz – 50KHz@ +4dB
- Dimensions: 5.04” x 2.95” x 1.57”
- Weight: 1.33 Lbs
Video of RCXMB10-B:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCXMB10-B Black Nickel Plated REAN XLR Male to 1/4'' TRS Cable
- 24 AWG 100% Copper Conductors for Enhanced Signal Clarity
- 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
- Length: 10 Ft
- Color: Black
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville monitors are backed with a full one year warranty, though it is unlikely that you will need to use it.
What's Included:
- (3) Fully metal wired mics
- (3) Mic clips
- (1) Aluminium carry case
- Owner’s manual
- Warranty
Description:
The Rockville RMC-3PK are the same exact microphones we use in our Pro Mic Kit 1 microphone/stand bundle. These microphones were created because we saw a need in the market for a high quality microphone at an affordable price. We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all. As a result we sent our very own product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all loved.
You may be asking yourselves, so what makes these mics sound so good? Our mics use an M-56 cartridge which have neodymium magnets. This supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than a great pickup pattern. They have very little background noise, and great tone.
The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made nice solid metal microphones. They have a great feel to them. We could have gone with plastic or cheaper metal, but we wanted to go with mics that we ourselves would want to use.
90 Day Money Back Guarantee including return shipping!
If within the first 90 days you are not 100 % satisfied for any reason, contact us and we will send you a return label and give you all your money back! (Item must be returned complete with all accessories and the original box please).
Features:
- Rockville RMC-3PK 3 Pack Metal Wired Vocal/Instrument/DJ Microphones + Metal Case
- Mic Features:
- M-56 Cartridge
- Full metal mic body
- Type: dynamic
- Neodymium magnet
- Polar Pattern: uni-directional
- Frequency Response: 80 - 13Khz
- Impedance: 600 Ohms ± 30%
- Sensitivity: -72 ± 3dB
- Case: High quality Aluminium carry case protects the mic during transportation
- (3) Heavy Duty Standard Size Microphone Clips
- Stand Mountable
- Color: Black
Specifications:
- Shipping weight: 2.04 lbs
- Shipping Dimensions: 12.4” x 9.25” x 3.94”
Shipping & Returns
Row content
%20Mics){kind=link}