MB QUART Bluetooth Radio Receiver w/LED For Select 2017-2020 Can-Am Maverick X3
Product Description
Description of MBQX-RAD-1:
Can-Am Maverick X3 UTV Tuned Audio Package: 160 Watt STAGE 1 Audio System with LED Gauge Mount Radio (AM/FM/BT and Apple Control) with mounting accessory and harnessing.
Works on all Can-Am Maverick X3 2017 and newer models. You get OEM quality fit and finish and MB Quart engineers have factory-matched materials and textures for a True Plug & Play installation.
Features Of MBQX-RAD-1:
- Source unit & mounting
The AM/FM, Bluetooth source unit (GMR-LED) is mounted in a dash accessory that will not require the radio to be removed to access the fuse panel or diagnostic port. - Compatible vehicle fitment
Can-Am Maverick X3 2017 and newer - Marine grade protection/ipx rating
IPX67 - Source unit features
MB Quart OFF-ROAD & Marine Multimedia Source Unit with 160 Watt internal amplifier features AM/FM/Bluetooth. - OFF-ROAD & Marine Multimedia Source Unit
160 Watt AM/FM/Bluetooth®, USB, Mobile Entertainment Controller - Bluetooth™ Connect & Quick-Pair
Quick and secure pairing of devices with your music library with album art displayed - USB Control
Easily connect smartphones, portable media devices and streaming services. iPod control allows full Apple® connectivity. - Dual Audio Zone Capability
Control volume in two different areas independently, such as passenger area and tower speakers - Radial Shift UX
Intuitive control navigation with master control and radial menu selection - Maximum Connectivity
Connect external amplifiers for speakers and subwoofers with six channels of connectivity.
Media Screen
On board 3.5 inch high-contrast LED screen to view media artwork and external camera input -
Life shield
Marine certified to IPX67 with large waterproof buttons - Source unit specification
- RMS POWER OUTPUT
4 x 20 Watts - PEAK POWER OUTPUT
4 x 40 Watts - MAXIMUM THD+N AT 4 OHMS
81.2dBA - EFFICIENCY AT FULL POWER 4 OHM (1KHZ)
0.639
IDLE CURRENT
0.3A - MAXIMUM UNDISTORTED PREAMP VOLTAGE (WITH 20K OHM LOAD)
4 Volts - SIGNAL TO NOISE (CTA-2006B)
Bluetooth -76.2 dBA, Aux -86.4dBA - SIGNAL TO NOISE RATIO OF LINE LEVEL OUTPUTS (AT MAX VOLUME)
Bluetooth -76.2 dBA, Aux -86.4dBA - PREAMP FREQUENCY RESPONSE (+/- 3.0DB)
Bluetooth 20Hz-20KHz, Aux 20Hz-20KHz - AMPLIFIER FREQUENCY RESPONSE (+/- 3.0DB)
Bluetooth 20Hz-20KHz, Aux 20Hz-20KHz - STEREO SEPARATION (AUX INPUT)
-64.1dB @ 5kHz - FM MONO USABLE SENSITIVITY
13dBf / 2.5µV - AM MONO USABLE SENSITIVITY
15 - 16µV - MINIMUM IMPEDANCE
4 Ohms - PRE-AMP OUTPUTS
3 Pair Front/Rear/Subwoofer, 1 CVBS Video Output - AUDIO INPUTS
1 Pair (Aux), 1 USB, 1 Composite Video (Camera) - DISPLAY TYPE
The unit display features a 3.3 inch full color round LED panel - UNIT DIMENSIONS HEIGHT
4.2 inches (107.2mm) - UNIT DIMENSIONS WIDTH
5 inches (127.2mm) - UNIT DIMENSIONS DEPTH FROM FACE
4 inches (99.7mm) - UNIT DIMENSIONS TOTAL MOUNTING DEPTH
TBD - DIMENSIONS MOUNTING HOLE
3.12 inches (7.93 cm) - DIMENSIONS MOUNTING DEPTH
2.87 inches (7.30 cm) - TUNER SECTION FM STEREO FREQUENCY RANGE
87.5MHz-108MHz - TUNER SECTION SIGNAL TO NOISE RATIO
>55dB - BLUETOOTH RANGE
32 Feet (10 Meters) - OUTPUT VOLTAGE
2V Single Ended (4V) - Mount/harness
Plug and Play Harness. Waterproof Connectors with pre-measured wires. No guesswork, no installation mistakes. - Time and tools
Standard hand tools are required. See the manual for time on each of the different components.
Fit Guide of MBQX-RAD-1:
- 2018-2020 Can-Am Maverick X3 Turbo (2 & 4 Seat)
- 2017-2020 Can-Am Maverick X3 Turbo R (2 & 4 Seat)
- 2017-2020 Can-Am Maverick X3 X RS Turbo R (2 & 4 Seat)
- 2020 Can-Am Maverick X3 X RS Turbo RR (2 & 4 Seat)
- 2017-2020 Can-Am Maverick X3 X DS Turbo R (2 & 4 Seat)
- 2020 Can-Am Maverick X3 X DS Turbo RR (2 & 4 Seat)
- 2018-2020 Can-Am Maverick X3 X RC Turbo
- 2018-2019 Can-Am Maverick X3 X RC Turbo R
- 2020 Can-Am Maverick X3 X RC Turbo RR
- 2018-2020 Can-Am Maverick X3 X MR Turbo
- 2018-2019 Can-Am Maverick X3 X MR Turbo R
- 2020 Can-Am Maverick X3 X MR Turbo RR (2 & 4 Seat)??
Shipping & Returns
Row content