MB QUART MBQR-POD-2 8" Kick Panel Speakers+Amp for Select Polaris RZR ATV UTV

$499.99 $249.95 Save 50% Sold out
Shipping calculated at checkout.
Product Description

Description of MBQR-POD-2:

Polaris RZR Tuned Audio Package: 400 Watt STAGE 2 Audio System includes 8 Inch 2 Way Compression Horn Speakers lower right & left speaker pods for 8 inch speakers, easy installation template.

Works on all Polaris RZR 2014-Current models.

  • Purposely Engineered TUNED AUDIO for Polaris RZR 2014-Current
  • High SPL 8 inch compression horn speakers make 30% louder than standard coaxials
  • High Impact HDPE Composite Enclosures RZR specific left and right kick panel enclosures, ultra compact design takes up minimal space
  • LIFEShield IPX Rated fully protected against the elements

Features of MBQR-POD-2:

Compatible Vehicle Fitment:

  • Polaris RZR 2014-Current

Marine Grade Protection/IPX Rating:

  • IPX67

Speaker Features:

  • Marine grade protection: LIFE SHIELD - Protectect for water and dirt. UV protected against sun fade.
  • Tweeter dome material: 1 Inch Pure Titanium Compression Diaphram - Very smooth musical response, with very high output with minimal required amplifier power
  • Compression horn: Coincident Mounted Compression Horn - Overall volume is improved as much as +5dB over conventional speakers, Wavelength Transparent Acoustic Lens improves midrange frequencies through the cone
  • Surround: Natural Butyl Rubber - Remains musical in all weather. Does not stiffen in cold.
  • Cone: 8 inch Composite Poly Cone - Water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
  • Voice coil former: High Temperature Voice Coil and Former - Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight.
  • Spider: Water resistant spider - Woven fiber composite spider to stabilize the cone and voice coil in all musical situations.
  • Cooling system: Front and Rear Venting - Air passes through the spider and back plate to exchange air over the voice coil.
  • Crossover type: 12dB Butterworth - Smooth transition from high to lower frequencies remain musicial and not harsh or distorted
  • Frame:Composite ABS and glass fiber frame - Composites add strenth to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker
  • Motor: High Energy Y30 Motor assembly - High energy strontium ferrite magnet for higher output with minimal amplifier power
  • Grills: Composite - UV treated against sun fade and waterproof
  • Marine certified: YES - Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand.
  • IPX67: YES - Tested to the highest Marine and Motorsports standards for resisting the elements
  • Tweeter materiaL: Titanium Dome Tweeter - Very smooth musical response, high output with minimal required amplifier power
  • Marine certified crossover: Marine Certified Crossover - Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection
  • Dimensions: 22.6 x 13.5 x 16.75 in

Features of NA2-400.2:

  • MB QUART NA2 400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
  • Marine Grade Protection: Yes - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
  • Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage - The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
  • Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • Operation Mode: Two channel operation - Flexible installation allows this amplifier to run in two channel or bridged mono mode.
  • Crossover / Signal Shaping: Switched FULL / LPF / HPF - Complete control of amplifier signal, essential when using two or more amplifiers
  • Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
  • Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
  • Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
  • Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  • Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
  • Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
  • Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • Marinized / Waterproof: Yes - Water resistant for durability in any environment


  • Class: Full Range Class D
  • Variable Voltage: 0.2V~9V
  • Signal to Noise Ratio: >90dB
  • Frequency Response: 20Hz-20kHz
  • Crossover Type: Electronic 12dB Per Octave
  • Low Pass Crossover: Switch Low Pass 300 Hz
  • Bass Boost: 0-12dB@45Hz
  • Subsonic Filter: 60Hz
  • Power @ 2-Ohms: 2 x 200W
  • Power @ 4-Ohms: 2 x 100W
  • Total Channels: 2
  • Audio Inputs: RCA
  • Power Terminal 12v/GND: Molex 10 ga
  • Speaker Terminal Wire Gauge: Molex Plug Connector
  • Fusing: 1 x 30 Amps
  • Certifications: Marine & Powersports
  • Dimensions: 3.70 X 5.51 X 1.77 in (9.4 X 14.0 X 4.5 cm)
  • Weight: 2.12 lbs (0.96 kg)


  •  Plug and Play Harness. Waterproof Connectors with pre-measured wires. No guesswork and no installation mistakes.

Time and Tools:

  • Standard hand tools are required. See the manual for time on each of the different components.


  • Full system harness capable of accommodating BT controller, 1 amplifier, which power 2 speakers


  • MBQR-ACC-1: RZR Radio and Dual Amplifier Harness is included with the system

Fit Guide of MBQR-POD-2:

  • 2013-2020 Polaris RZR XP/XP4 1000
  • 2014-2020 Polaris RZR XP/XP4 Turbo
  • 2018.5 – 2020 Polaris RZR Turbo S/Turbo S4
  • 2014-2020 Polaris RZR 900/900S/1000S
  • 2014-2018 Polaris RZR S4 900
  • 2019-2020 Polaris RZR S4 1000
Shipping & Returns

Row content