











MB QUART MBQX-STG2-RAD-1 Audio Package For Select 2017-2020 Can-Am Maverick X3
Product Description
Description:
Can-Am Maverick X3 UTV Tuned Audio Package: 400 Watt STAGE 2 Audio System includes AM/FM, BT LED Source Unit, front speakers and speaker mounts, 400 Watt compact amplifier, and all necessary mounting panels and harnessing are included.
Works on all Can-Am Maverick X3 2017 and newer models. You get OEM quality fit and finish and is designed to accommodate the Smart-Lok™ system. MB Quart engineers have factory-matched materials and textures for a True Plug & Play installation.
- Purposely Engineered for Can-Am X3
- Meticulously Engineered Vehicle Panels better than OEM Fitment
- AM/FM, Bluetooth® with Apple® iPod / iPhone Control
- High Efficiency, Full Range Class D 400 Watt Amplifier
- 6.5 Inch Off Road & Marine Grade Front Speakers
- High Impact Polypropylene Composite Speaker Panels
Features:
- Source unit & mounting
The AM/FM, Bluetooth source unit (GMR-LED) is mounted in a dash accessory that will not require the radio to be removed to access the fuse panel or diagnostic port.
MBQX-RAD-1: LED Gauge Mount Radio with AM/FM/BT and Apple Control Maverick X3 Radio Dash Mounting Panel. - Front speakers & mounting
The 6.5 components are the NP1-116 two way speakers. The left speaker panel is Smart-Lok™ Diff Model capable and retains all factory mounts for ECU's. No relocation brackets or customization required. - RMS POWER HANDLING (WATTS)
60 - PEAK POWER HANDLING (WATTS)
120 - SPEAKER IMPEDANCE (OHMS)
4 - FREQUENCY RESPONSE
30Hz-22kHz - SENSITIVITY
92dB - CROSSOVER SLOPE
6dB / Octave - MOUNTING DIAMETER/CUT OUT (IN)
5.6 - MOUNTING DEPTH/CHASSIS DEPTH (IN)
3.05 - MBQX-POD-1: 6.5 Inch 2 Way Composite Coaxial Speakers, right and left speaker dash panels for 6.5 inch speakers, easy installation, 400 Watt Two Channel Class D, Compact Powersports Amplifier.
Full range amplifier & mounting
NA2-400.2: High Efficiency, Full Range Class D 400 Watt Amplifier with mounting plate.
- Class: Full Range Class D
- Variable Voltage: 0.2V~9V
- Signal to Noise Ratio: >90dB
- Frequency Response: 20Hz-20kHz
- Crossover Type: Electronic 12dB Per Octave
- Low Pass Crossover: Switch Low Pass 300 Hz
- Bass Boost: 0-12dB@45Hz
- Subsonic Filter: 60Hz
- Power @ 2-Ohms: 2 x 200W
- Power @ 4-Ohms: 2 x 100W
- Total Channels: 2
- Audio Inputs: RCA
- Power Terminal 12v/GND: Molex 10 ga
- Speaker Terminal Wire Gauge: Molex Plug Connector
- Fusing: 1 x 30 Amps
- Certifications: Marine & Powersports
- Dimensions: 3.70 X 5.51 X 1.77 in
- Weight: 2.12 lbs
- H
- Accessories
MBQX-ACC-1: Maverick X3 Radio and Triple Amplifier Harness, Maverick X3 Amplifier Mounting Brackets. - Compatible vehicle fitment
Can-Am Maverick X3 2017 and newer
MARINE GRADE PROTECTION/IPX RATING
IPX67 - Source unit features
MB Quart OFF-ROAD & Marine Multimedia Source Unit with 160 Watt internal amplifier features AM/FM/Bluetooth. - OFF-ROAD & Marine Multimedia Source Unit
160 Watt AM/FM/Bluetooth®, USB, Mobile Entertainment Controller - Bluetooth™ Connect & Quick-Pair
Quick and secure pairing of devices with your music library with album art displayed - USB Control
Easily connect smartphones, portable media devices and streaming services. iPod control allows full Apple® connectivity. - Dual Audio Zone Capability
Control volume in two different areas independently, such as passenger area and tower speakers - Radial Shift UX
Intuitive control navigation with master control and radial menu selection - Maximum Connectivity
Connect external amplifiers for speakers and subwoofers with six channels of connectivity. - Media Screen
On board 3.5 inch high-contrast LED screen to view media artwork and external camera input - LIFE SHIELD
Marine certified to IPX67 with large waterproof buttons
Source unit specifications
- RMS POWER OUTPUT
4 x 20 Watts - PEAK POWER OUTPUT
4 x 40 Watts - MAXIMUM THD+N AT 4 OHMS
81.2dBA - EFFICIENCY AT FULL POWER 4 OHM (1KHZ)
0.639 - IDLE CURRENT
0.3A - MAXIMUM UNDISTORTED PREAMP VOLTAGE (WITH 20K OHM LOAD)
4 Volts - SIGNAL TO NOISE (CTA-2006B)
Bluetooth -76.2 dBA, Aux -86.4dBA - SIGNAL TO NOISE RATIO OF LINE LEVEL OUTPUTS (AT MAX VOLUME)
Bluetooth -76.2 dBA, Aux -86.4dBA - PREAMP FREQUENCY RESPONSE (+/- 3.0DB)
Bluetooth 20Hz-20KHz, Aux 20Hz-20KHz - AMPLIFIER FREQUENCY RESPONSE (+/- 3.0DB)
Bluetooth 20Hz-20KHz, Aux 20Hz-20KHz - STEREO SEPARATION (AUX INPUT)
-64.1dB @ 5kHz - FM MONO USABLE SENSITIVITY
13dBf / 2.5µV - AM MONO USABLE SENSITIVITY
15 - 16µV - MINIMUM IMPEDANCE
4 Ohms - PRE-AMP OUTPUTS
3 Pair Front/Rear/Subwoofer, 1 CVBS Video Output - AUDIO INPUTS
1 Pair (Aux), 1 USB, 1 Composite Video (Camera) - DISPLAY TYPE
The unit display features a 3.3 inch full color round LED panel - UNIT DIMENSIONS HEIGHT
4.2 inches (107.2mm) - UNIT DIMENSIONS WIDTH
5 inches (127.2mm) - UNIT DIMENSIONS DEPTH FROM FACE
4 inches (99.7mm) - UNIT DIMENSIONS TOTAL MOUNTING DEPTH
TBD - DIMENSIONS MOUNTING HOLE
3.12 inches (7.93 cm) - DIMENSIONS MOUNTING DEPTH
2.87 inches (7.30 cm) - TUNER SECTION FM STEREO FREQUENCY RANGE
87.5MHz-108MHz - TUNER SECTION SIGNAL TO NOISE RATIO
>55dB - BLUETOOTH RANGE
32 Feet (10 Meters) - OUTPUT VOLTAGE
2V Single Ended (4V) - Speaker features
These speakers are meticulously engineered to fit in the X3 dash. They include a 1" Titanium Dome Tweeter that will deliver natural sounding high frequency response, while producing high volume. Injection molded composition Polypropylene cone produces impactful bass with minimal cone flex. The Composite (UV Resistant ASA+Fiberglass) frames are incredibly strong and lightweight. The entire assembly earns an IPX68 rating which makes it as indestructible as the X3. - Amplifier features
High Efficiency Class D Compact Powersports Amplifier. - Mount/harness
Plug and Play Harness. Waterproof Connectors with premeasured wires. No guess work, no installation mistakes. - Time and tools
Standard hand tools are required. See the manual for time on each of the different components.
System Includes:
- SOURCE UNIT & MOUNTING
The AM/FM, Bluetooth source unit (GMR-LED) is mounted in a dash accessory that will not require the radio to be removed to access the fuse panel or diagnostic port.
MBQX-RAD-1: LED Gauge Mount Radio with AM/FM/BT and Apple Control Maverick X3 Radio Dash Mounting Panel. - FRONT SPEAKERS & MOUNTING
The 6.5 components are the NP1-116 two way speakers. The left speaker panel is Smart-Lok™ Diff Model capable and retains all factory mounts for ECU's. No relocation brackets or customization required.
MBQX-POD-1: 6.5 Inch 2 Way Composite Coaxial Speakers, right and left speaker dash panels for 6.5 inch speakers, easy installation, 400 Watt Two Channel Class D, Compact Powersports Amplifier. - FULL RANGE AMPLIFIER & MOUNTING
NA2-400.2: High Efficiency, Full Range Class D 400 Watt Amplifier with mounting plate. - HARNESSING
Included with appropriate components. - ACCESSORIES
MBQX-ACC-1: Maverick X3 Radio and Triple Amplifier Harness, Maverick X3 Amplifier Mounting Brackets.
Fit Guide:
- 2018-2020 Can-Am Maverick X3 Turbo (2 & 4 Seat)
- 2017-2020 Can-Am Maverick X3 Turbo R (2 & 4 Seat)
- 2017-2020 Can-Am Maverick X3 X RS Turbo R (2 & 4 Seat)
- 2020 Can-Am Maverick X3 X RS Turbo RR (2 & 4 Seat)
- 2017-2020 Can-Am Maverick X3 X DS Turbo R (2 & 4 Seat)
- 2020 Can-Am Maverick X3 X DS Turbo RR (2 & 4 Seat)
- 2018-2020 Can-Am Maverick X3 X RC Turbo
- 2018-2019 Can-Am Maverick X3 X RC Turbo R
- 2020 Can-Am Maverick X3 X RC Turbo RR
- 2018-2020 Can-Am Maverick X3 X MR Turbo
- 2018-2019 Can-Am Maverick X3 X MR Turbo R
- 2020 Can-Am Maverick X3 X MR Turbo RR (2 & 4 Seat)????
Shipping & Returns
Row content