Peavey ALS 75.9 Mhz Assisted Listening System+4 Receivers+2 Additional Receivers
Product Description
- (1) Peavey ALS 75.9 Mhz Assisted Listening System With 4 Receivers/Ear Buds
- (2) Peavey ALSR 75.9 Mhz Assisted Listening Receivers Body Pack
Features of ALS 75.9:
- Peavey ALS 75.9 Mhz Assisted Listening System Transmitter And Four Receivers With Ear Buds
- Frequency Response 100Hz – 15 KHz, +/- 3dB
- Signal-to- Noise Ratio 60dB
- Total Harmonic Distortion <0.5%
- RF Carrier Frequency between 72-76 MHz
- Frequency Stability +/- 0.005%
- Modulation FM +/- 75KHz max
- Operating Range Up to 300 ft. line of sight
Transmitter
- Mic Input – Connector: ¼” phone jack, Impedance: low impedance, unbalanced, with 9V DC at 1 mA for condenser mic.
- Line Input – Connector: ¼” phone jack, Impedance: 100 K, unbalanced.
- Power Output – 80,000 uV @ 3 meters.
- Controls – Power ON/OFF, audio input gain adjust
- Indicators – Power ON LED, Audio Modulation LED
- Antenna – Permanently mounted telescoping whip
- Power Requirement – 9V DC, regulated @ 200 mA, AC/DC adapter provided
- Dimensions – 220 x 121 x 43mm
- Weight – 19.5 oz (600g)
Receiver
- Controls – Combination VOLUME/ON-OFF wheel
- Audio Output – 250 mW max into 16 ohms
- Connectors – 3.5mm mini jack for earphone output
- Earphones – Mini binaural ear buds
- Antenna – Integral with earphone cord
- Indicators – LED power on indicator
- Sensitivity – 2 uV for 12 dB Sinad with squelch defeated, Squelches at 10 uV for min. 50 dB S-N ratio
- Mute Threshold – 8-10 uV
- Power Requirement – (2) AA Batteries
- Battery Life – 17-20 hours with alkaline battery
- Dimensions – 110 x 60 x 20 mm
- Weight 2.75 oz without batteries (80g)
Peavey Assisted Listening Transmitter
The transmitter operates on the 72-76 MHz auditory assistance frequencies. Transmitted field strength shall not exceed 8000 uV/m at 30 meters. Maximum FM deviation should not exceed 75 KHz. Transmitter signal pre-emphasis is 75 uS. Frequency stability is controlled by a phase locked loop synthesizer with crystal reference and accurate within +/-.0005% over 0-50 degrees C. The transmitter provides a permanently mounted telescoping whip antenna. The FCC approved transmitter is powered by a UL and CSA listed AC wall transformer providing 9V DC input to the transmitter via a 3.5mm DC jack. The transmitter includes a ¼” line-in jack, mounted on the rear panel and ¼” electret condenser microphone jack with 9V DC power (at 1.0 mA), and mounted on the front panel. Also included, is an adjustable audio level control and a red LED “Power On” indicator.
Peavey Assisted Listening Receiver
The receiver operates on a single frequency in the 72-76 MHz auditory assistance band. Frequency stability is controlled by a phase locked loop synthesizer with crystal reference and accurate within +-.005% over 0-50 degrees C. The receiver de-emphasis is 75 uS. The receiver provides a 3.5 mm headphone output jack mounted on the top panel. The receiver is powered by (2) AA batteries. The receiver has an OFF/ON/VOLUME control mounted on the top panel, LED lamp to indicate battery strength, and an antenna shall be integral to the earphone/ear bud cord
Features of ALSR 75.9:
- Peavey ALSR 75.9 Mhz Assisted Listening Receiver Body Pack for ALS 75.9 System
- Frequency Response 100Hz – 15 KHz, +/- 3dB
- Signal-to- Noise Ratio 60dB
- Total Harmonic Distortion <0.5%
- RF Carrier Frequency between 72-76 MHz
- Frequency Stability +/- 0.005%
- Modulation FM +/- 75KHz max
- Operating Range Up to 300 ft. line of sight
PEAVEY Assisted Listening Receiver
The receiver operates on a single frequency in
the 72-76 MHz auditory assistance band. Frequency stability is
controlled by a phase locked loop synthesizer with crystal reference
and accurate within +-.005% over 0-50 degrees C. The receiver
de-emphasis is 75 uS. The receiver provides a 3.5 mm headphone output
jack mounted on the top panel. The receiver is powered by (2) AA
batteries. The receiver has an OFF/ON/VOLUME control mounted on the top
panel, LED lamp to indicate battery strength, and an antenna shall
be integral to the earphone/ear bud cord
RECEIVER
- Controls – Combination VOLUME/ON-OFF wheel
- Audio Output – 250 mW max into 16 ohms
- Connectors – 3.5mm mini jack for earphone output
- Earphones – Mini binaural ear buds
- Antenna – Integral with earphone cord
- Indicators – LED power on indicator
- Sensitivity – 2 uV for 12 dB Sinad with squelch defeated, Squelches at 10 uV for min. 50 dB S-N ratio
- Mute Threshold – 8-10 uV
- Power Requirement – (2) AA Batteries
- Battery Life – 17-20 hours with alkaline battery
- Dimensions – 110 x 60 x 20 mm
- Weight 2.75 oz without batteries (80g)
Shipping & Returns
Row content
