Peavey FX2 32 32x4x2 Mixer w/ 2 USB Ports+Dual DSP FX + Nady In-Ear Monitors

• (1) Peavey FX2 32 32x4x2 Professional Mixer w/ 2 USB Ports + Dual DSP FX Engine FX 2
• (1) Nady PEM-1000 Band 2 Wireless In-Ear Monitoring System w/100 UHFChannels

Authorized Peavey Dealer!

Videos of FX2 32:

Description:

The new FX2 features twice the processing power of the original. FX2 Series mixers feature new, Peavey-exclusive technology to enhance live sound reproduction and project studio recording, including Silencer mic preamps, which allow very high gain with low noise and distortion for crystal-clear signal reproduction. The four pre-fader auxes per channel provide four monitor mixes, while the two post-fader auxes are ideal for adding effects (built-in or outboard). These mixers also include dual DSP engines that allow multiple simultaneous effects assignable to any channel via aux 5/6. Onboard effects include reverb, reverb enhanced, delay, compression, expander, de-esser, chorus, flanger, tube emulator, vocal enhancer and gate. Chain two processors together on each of the two available effects windows. The digital output processing section includes Feedback Ferret®, dual 5-band Parametric EQ or dual 28-band Graphic EQs, digital delay lines, and dynamics/limiters. The output section can be configured for Stereo, Dual Mono or Subwoofer mode with a built-in electronic crossover. The mixer features dual USB 2.0 ports, and the "A" USB connector allows streaming of digital audio directly to a computer or memory stick as well as exclusive, built-in MP3 compression. You can record your rehearsals, songwriting sessions or live performances directly to an inexpensive USB stick ... no other hardware needed and then transfer them to your computer to burn CDs or to transmit electronically. Or insert a memory stick to playback audio files for use between sets.

Features:

• Peavey's FX 2 32 Channel Professional Mixer
• High-power dual DSP engine with improved digital effects and output processing including Feedback Ferret®, 28-band GEQ/5-band PEQ, delay and limiter
• USB 2.0 "A" connection to record directly to or playback from memory stick
• USB 2.0 "B" connection for streaming digital out
• 3-band EQ with sweepable mid-frequency and variable low cut filters
• 2 stereo channels with dual mic/line inputs
• 48 volt phantom power
• 6 Aux sends
• 4 subgroups
• 100mm faders
• Double the processing power of the original FX Series
• All new switching power supply design is more efficient than the original
• Silencer™ mic preamp XLR inputs

Details:

• Weight Packed: 45.00 lb (20.412 kg)
• Width Packed: 25" (63.5 cm)
• Height Packed: 36" (91.44 cm)
• Depth Packed: 11.5" (29.21 cm)

Features of PEM-1000 BAND 2:

• Nady PEM-1000 Wireless In-Ear Monitoring System
• 100 selectable UHF frequencies for interference-free performance (Up to 8 systems can operate simultaneously)
• System consists of one PEM-1000T transmitter and one PEM-1000R body pack receiver. (Unlimited additional PEM-1000R receivers can operate with the same transmitter)
• Easy setup and use with either automatic Auto scan or manual open-frequency selection, and ASC™ infrared synchronization of selected channel between transmitter and receivers
• Rugged, all-metal half-rack transmitter. Rack mountable singly or side-by-side with optional rack kits.
• Both transmitter and receiver offer a user-friendly menu with complete control options shown in the LCD display
• Proprietary companding circuitry for wide Dynamic Range and clear, natural sound
• Includes lightweight, soft rubber, form-fitted ear buds for comfort and optimum acoustics and isolation
• Operating Range: Up to 500 feet typical (depending on site conditions)
• Rugged, foam-padded traveling case provides easy, safe transport and storage
• Latest frequency BAND 2: 583-607.750

PEM-1000T Transmitter:

• Rugged, all metal half-rack that can be rack mounted singly or side-by-side with optional rack kits
• Front panel features stereo headphone monitor output jack and volume control, select button for choosing one of 100 UHF channels, Left/Right 5-segment audio input level displays, LCD channel display, and IR SYNC to system receivers
• Back panel provides BNC jack for the detachable antenna, a combo 1/4" TRS unbalanced, and balanced XLR jacks for Left and Right Line inputs, Left and Right 1/4" TRS unbalanced loop outputs
• Externally powered by AC-DC power adapter

PEM-1000R Receiver:

• Portable body pack receiver features a power switch switchable with built-in volume output level control, select button for choosing one of 100 UHF channels, LCD channel display, stereo/mono, Signal/Low Battery LED indicator.
• Receiver has AUTO-SCAN for finding an open channel and IR SYNC to system transmitter
• Handy Mute Button for muting audio if desired during use
• Operates up to 8 hours (depending on volume) on 2x1.5V AA alkaline batteries
• Each receiver is supplied with a pair of miniature, lightweight (yet powerful) in-ear speakers with soft rubber mounts, designed for "custom" form-fitted comfort and optimum acoustic transfer and isolation.
• Rear clip can be rotated 180° for attaching receiver either vertically up or down position
• Latest frequency BAND 2: 583-607.750