Polk Audio MM1042DVC 10” 1200w DVC Car Audio Subwoofer+Vented Sub Box Enclosure
Product Description
Package Includes:
- (1) Polk Audio 10” Car/Marine Audio Subwoofer
- (1) Rockville Single 10" Vented Ported Subwoofer Sub Box Enclosure
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Authorized Polk Dealer!
Description for Polk Sub:
The Premium Upgrade
Tuned for the total sonic accuracy you get in a studio subwoofer, the
MM1 Series reconfigures this kind of high-quality deep bass impact for
an on-the-go listening experience that totally outperforms your OEM
factory setup.
Advanced High-Performance Bass
Every element of the MM1 Series is meticulously engineered for
thunderous bass, enhanced sonic detail and ultra-durable
construction—Dynamic Balance technology, a high excursion bump stack
motor structure, glass fiber formers, multilayered and oversized voice
coils, high-temp Conex spiders, a vented pole and basket structure, and
integrated fuses.
Ultra-Marine Certified
Featuring an IP56 rating that includes a non-corrosive fiberglass
reinforced ABS basket, a water-proof surround, weep holes for proper
drainage and a polypropylene cone, you get extra, long-lasting
protection—that’s all salt-fog and UV tested.
Dynamic Balance Technology
Patented process that guides material selection through rigorous testing
that identifies and cancels out unwanted resonant frequencies.
Included:
- One 8" 4 ohm subwoofer
- Stainless steel mounting hardware
Features:
- Polk Audio MM1042DVC 10” 1200 Watt Dual 4-Ohm Car/Marine Audio Subwoofer Sub
- Driver Compliment: 10" (254mm)
- Cutout Dimensions: 9" (230mm)
- Mounting Height: 0.55" (14.06mm)
- Mounting Depth (Top): 4.6" (115mm)
- Mounting Depth (Bottom): 5" (129mm)
- Peak Power Handling: 1200 Watts
- Continuous Power Handling: 400 Watts RMS
- Nominal Impedance: 4 Ohms
- Frequency Response: 28Hz-200kHz
- Sensitivity: 86 dB
- Magnet Weight: 54.4 oz
- Magnet Material: Ceramic
- Magnet Size: 140mm x 60mm x 25mm
- VC Diameter: 2"
- Enclosure Volumes:
- Minimum Sealed: 1.0 cu. ft.
- Maximum Sealed: 2.4 cu. ft.
- Minimum Vented: 1.25 cu. ft.
- Maximum Vented: 1.75 cu. ft.
Description for Rockville Enclosure:
Features:
- Rockville RQB10 Single 10" Vented Ported Subwoofer Sub Box Enclosure 1.4 cu ft
- Single 10" Side Ported
- Finished with Durable Bed Liner
- 3/4" MDF
- High Quality Spring Loaded Terminal
- Air Space: 1.4 Cubic Feet
- Tuning Freq- 39Hz
- Mounting Depth: 8"
- Height: 11"
- Width: 20"
- Depth: 14"
- Cutout diameter: 9.185"
About Rockville Quality Control Procedures:
The
Rockville brand stands for Quality, Innovation and Value. All Rockville
products go through the most rigorous quality control standards in the
industry. Products go through months of extensive testing before they
reach your hands. All user functions are tested and all internal
components are tested for quality. Rockville makes products that are
virtually un-breakable! Rockville is one of the only brands in its class
to test every concept model for weeks or months before starting
production. Once production begins, Rockville sends product engineers to
their factory to quality control every line of production. During
production every product is tested and on top of that Rockville goes the
extra mile and has their high level product engineers do an additional
quality control. They test a certain percentage of all products from the
production line a second time to ensure that the quality meets their
vigorous standards, and to make sure that there is never a batch of
products with even a slight problem. All Rockville products are backed
with a hassle free warranty, though it is unlikely that you will need to
use it.
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Shipping & Returns
Row content
