Polk Audio PAD2000.2 2-Channel 500w RMS Class D Car Amplifier+Amp Kit PA D2000.2
Product Description
- (1) Polk Audio PAD2000.2 2-Channel 500w RMS Class D Car Amplifier Amp
- (1) Rockville RWK41 4 Gauge Complete Wire Kit w/RCA's
Authorized Polk Dealer!
Features of PAD2000.2:
- Polk Audio PAD2000.2 2-Channel 500w RMS Class D Car Amplifier Amp PA D2000.2
- Super-Efficient Class D Bridgeable Design— Runs cooler than conventional amps.
- High-Speed MOSFET Switching power supply.
- Toroidal Transformers—Help keep the amplifier’s sleek design under 2" tall while ensuring plenty of clean, efficient power.
- Protection—Thermal, DC offset, reverse DC voltage and short circuit protection.
- FULL, HPF, BPF Switch—Selects full range, high pass filter, or band-pass filter for dialing in your crossover for the ideal speaker blending.
- Adjustable Low & High Pass Frequency Range— Enables you to fine tune the blending of your speakers in their frequency range overlap.
- Level Control—Adjusts the gain of the left and right channels to match the output voltage from your head unit.
- Line Level Inputs—Accepts line level input from a head unit, preamplifier or, equalizer.
- Line Level Outputs—Provides a full range signal for easy connection to additional amplifiers.
- Nickel-Plated Wire Terminals & RCA Connectors— Ensure maximum signal transfer.
- Stainless Steel Hardware—Used throughout won’t corrode in humid environments.
Specifications:
- Type: Bridgeable Class D MOSFET
- Channels: 2 channel
- RMS Continuous Power @ 4 Ohms: 125 W x 2
- RMS Continuous Power @ 2 Ohms: 250 W x 2
- RMS Continuous Power Bridged @ 4 Ohms: 500 W x 1
- Distortion at Rated Power: < 0.1%
- Minimum Impedance Bridged: 4 Ohms
- Minimum Impedance Not Bridged: 2 Ohms
- Signal-to-noise Ratio: 105 dB
- Frequency Response: 20 Hz - 20 kHz
- Damping Factor: >100
- Crossover Filter Slope (dB/octave): 12 dB/octave
- Filter Switch 3-position: (HPF, Full & BPF)
- High Pass Filter Frequency Range: 20 Hz - 4 kHz
- Low Pass Filter Frequency Range: 50 Hz - 5 kHz
- Line Level Inputs
- Line Level Outputs
- LED Power Indicator
- LED Protection Indicator
- Input Sensitivity: 200 mV - 6 V
- Supply Voltage: 10 V - 16 V
- Fusing & Power/Type: (2) 25 Amp ATC
- Power Connections: 4 AWG
- Ground Connections: 4 AWG
- Speaker Connections: 12 AWG
- Height: 1 13/16" (46 mm)
- Depth: 6 3/4" (171.5 mm)
- Width: 8 1/4" (209.6 mm)
- Width w/ Terminal Adaptor: 9" (228.6 mm)
- Weight: 3 3/4 lbs (1.7 kg)
Video of RWK41:
Unboxing Video for RWK41:
Authorized Rockville Dealer!
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
Shipping & Returns
Row content
