Polk Audio PAD5000.5 5-Channel 900w RMS 2-Ohm Car Audio Amplifier Amp PA D5000.5
Product Description
Authorized Polk Dealer!
Features:
- Polk Audio PAD5000.5 5-Channel 900w RMS 2-Ohm Car Audio Amplifier Amp PA D5000.5
- Super-Efficient Class D Design—Runs much cooler than conventional amps.
High-Speed MOSFET Switching—Power supply with outputs stable into 2 Ohm loads for full range channel speakers and 1 Ohm loads for subwoofer channel. - Protection—Thermal, DC offset, reverse DC voltage and short circuit protection.
- Sub 1/Sub 2 Inputs—Line level inputs for subwoofer signal from head unit
- SUB/INT Source Switch—In the INT position, the amplifier will filter the bass frequencies from the full range signal and send them to the subwoofer amplifier channel.
- SUB Sonic Filter—Attenuates the frequencies below the settings on the control.
- Remote Bass Level Control—Set gain to match output from head unit.
- Rear Full, HPF Switch—Selects between no filtering or a high pass filter to dial in your speakers' blending.
- Channel Mode Switch (4CH/ST)—In the ST position, the amplifier sends the same signal to the front and rear channels.
- Nickel-Plated Wire Terminals & RCA connectors— Ensure maximum signal transfer.
- Stainless Steel Hardware—Used throughout won't corrode in humid environments.
Specifications:
- Type: Bridgeable Class D MOSFET
- Channels: 5 channel
- RMS Continuous Power @ 4 Ohms: 70 W x 4; 200 W x 1
- RMS Continuous Power @ 2 Ohms: 100 W x 4; 400 W x 1
- RMS Continuous Power Bridged @ 4 Ohms: 200 W x 2
- RMS Continuous Power 1 Ohm (Sub): 500 W x 1
- Distortion at Rated Power: <0.1%
- Remote Gain Control Included (sub only)
- Minimum Impedance Bridged: 4 Ohms
- Minimum Impedance Not Bridged: 2 Ohms
- Minimum Impedance Subwoofer Channel: 1 Ohm
- Signal-to-noise Ratio: 105 dB
- Frequency Response: 20 Hz-20 kHz
- Crossover Filter Slope: 12 dB/octave
- Front Gain Control: 200 mV - 6 V
- Filter Switch (Front): 3-position (BPF, Full, HPF)
- High Pass Filter Frequency Range (Front): 40 Hz - 400 Hz
- Low Pass Filter Frequency Range (Front): 80 Hz - 4 kHz
- Filter Switch (Rear): 2-position (Full, HPF)
- High Pass Filter Frequency Range (Rear): 40 Hz - 4000 Hz
- Rear Gain Control: 200 mV - 6 V
- Line Level Inputs
- LED Power Indicator
- LED Protection Indicator
- Supply Voltage: 10 V - 16 V
- Fusing & Power/Type: (2) 40 Amp ATC
- Power Connections: 4 AWG
- Ground Connections: 4 AWG
- Speaker Connections: 12 AWG
- Height: 1 13/16" (46 mm)
- Depth: 6 3/4" (171.5 mm)
- Width: 13 5/16" (338.1 mm)
- Width w/ Terminal Adaptor: 14 1/16" (357.9 mm)
- Weight: 6 3/4 lbs (3.06 kg)
Advantages of buying from an authorized seller:
- Best prices - We sell all Polk Audio Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Polk Audio product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Polk Audio from an unauthorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Shipping & Returns
Row content