Rockville RCM01 Studio Podcast Recording Microphone+Samson Gooseneck Mic Stand
Shipping calculated at checkout.
Product Description
How to Setup your Podcast - Microphones, Interfaces, and Equipment (Rockville University Ep 1.) :
How to Set Up a Podcast in Under 60 Seconds :
Package Includes:
- (1) Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville RDMS7 Desktop Mic Stand w 11.8" Gooseneck+Weighted Base+Webcam Adapter
How to Setup a Rockville Condenser Microphone with Your Computer:
Video of RCM01:
Unboxing Video of RCM01:
Authorized Rockville Dealer
The Rockville RMC01 condenser microphone performs better than famous branded microphones that cost over $100.Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM01 amazing in studio applications.
The full metal construction makes the RCM01 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of all metal. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM01
Condenser Microphone
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
- 100%
Copper 10 foot XLR to XLR cable to connect to any mixer with phantom
power
- Metal
shock mount
- Anti-wind
foam cap
- Owners
Manual
- Warranty
card
Features:
- Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- RCM01
condenser microphone
- Full
metal high quality construction
- Polar
Pattern: Internally Polarized Condenser Cardioid Design
- Large
diaphragm for smooth, natural sound and low noise
- Power
Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity:
-27dB±2dB(0dB=1V/Pa at1kHZ)
- Output
impedance: 200O±30%(at 1kHz)
- Standard
operating voltage: 3V
- Operating
voltage range: 1.5V-10V
- Current
consumption: less than 500uA
- Voltage
deduction characteristic: within 3dB at 2V
- S/N
ratio: More than 24dB
- Frequency
Response: 30Hz - 20 KHz
- Fixed
Crossover Filter cutoff frequency: 40Hz---16 KHz
- Load
impedance: Greater or = to 1000 Ohms
- Equivalent
Noise level: Less than 18dB A (IEC581-5)
- Max.
Input SPL: 126dB(THD=1.0% at 1kHZ)
- Electrical
current: Greater than 4.8Ma
- Microphone
body net weight:325 Grams (0.72 Pounds)
- Microphone
Max.diameter 48mm (1.89” inches)
- Microphone
Length 157mm (6.18” inches)
- Microphone
material: steel grille + Zinc alloy (handheld part)
- PCB Layout: Surface mount
RDMS7 PRODUCT VIDEO:
What's in the Box:
- Mic stand
- Mic clip
- 5/8” to ¼” webcam adapter
- 3/8” to 5/8” mic adapter for use with any mic clip or shock mount
Features of RDMS7:
- Rockville RDMS7 Desktop Gooseneck Mic Stand or Webcam Stand
- Interchangeably can be used for any microphone or web camera
- 11.8” Gooseneck is Stiff and Sturdy Yet Bendable in Any Direction For Extreme Stability and Durability
- 6.5” Heavy-Duty Round Weighted Base Makes This Stand Super Sturdy
- Professional Stand is Perfect for Studio, Podcasting, and Many Other Applications
- Includes Standard Mic Clip for Dynamic Mics
- 5/8” Threading Fits Any Standard Mic
- Includes a Metal 3/8" to 5/8" Adapter to Support Any Mic Clip or Shock Mount on the Market
- For Condenser Mics – This is Compatible With Any Shock Mount (Rockville Rockshock is Recommended)
- Includes 5/8” to ¼” adapter to work with any standard webcam
- Compatible With Rockville IPS22 Phone/Tablet Holder (Sold Separately in Our Store)
- All black design! Even the gooseneck is black. This looks great in a kitchen or on your computer desk
