Rockville W10K9D2 10" 3200w Car Subwoofer+Sealed Sub Box+Mono Amplifier+Amp Kit

$743.93 $327.85 Save 56%
Shipping calculated at checkout.
Product Description

Package Includes:

  • (1) Rockville 10" Car Audio Subwoofer
  • (1) Rockville Single 10” 0.75 cu.ft. 3/4” MDF Sealed Car Sub Enclosure Box
  • (1) Rockville KRYPTON-M2 3000w Peak/750w RMS Mono 1 Ohm Car Amplifier Amp+Remote
  • (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

Description of W10K9D2:

The Rockville K9 series has been our best selling series of subs and it just got even better! Say hello to the K9 V3. This sub is a game changer. We improved the performance and cooling like crazy! Our engineers did some minor tweaks that give major results for bassheads who like to abuse subs! Weather you are an every day user or someone who pushes the limits of your equipment the K9 V3 is for you!

We made the following upgrades that will keep the voice coil cooler improving the subs ability to take constant abuse.

1. The dustcap was upgraded to the same one we use in our Punisher series. It is top of the line. We figured it just cost us a couple dollars extra, so why not throw on the best dustcap.

2. We added an inner dustcap that stops heat from building up in the voice coil. We also made our pole vent smaller. The combination of these 2 changes keeps the voice coil significantly cooler when you are playing bass heavy songs or test tones.

3. We added a voice coil spacer that vastly improves the performance.

4. The cone has a smooth finish that allows the dustcap to be glued on more securely.

Features:

  • Rockville W10K9D2 V3 K9 Series 10" Dual 2-Ohm Car Subwoofer
  • Peak Power Handling: 3200 Watts
  • Program Power Handling: 1600 Watts
  • RMS Power Handling: 800 Watts
  • Ultra-stiff Non-Pressed Paper Punisher Cone
  • Ultra-stiff Polypropylene Punisher Dustcap (The K9 V3 now uses the same dustcap as our Punisher series)
  • We added an inner dustcap which helps to avoid hot air build-up in the voice coils resulting in more power handling
  • More efficient air ventilation cools the voice coil even better than our V2
  • We added a voice coil spacer improving longevity during test tones or extreme bass-heavy songs
  • 3" 4-Layer Black Aluminum Voice Coils Wound with OFC Wire Made in USA
  • This voice coil is stable up to 240 degrees celcius! The voice coil windings are made in the USA
  • Double Stacked 185 Oz High Quality Magnet
  • Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient And Lighter Weight
  • Two Chrome-Plated Binding Post Terminals
  • Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
  • White Stitching Cone Reinforcement Ensures Long Life
  • Impedance: Dual 2-Ohm Voice Coils
  • Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
  • Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
  • High BL Magnetic Motor Gap
  • We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
  • Nomex Spider provides tear resistance, strength and long-term reliability over regular cotton and poly cotton spiders
  • Cutout Diameter: 9.37” inches
  • Mounting Depth: 6.5” inches
  • Frequency Response: 37.8 Hz - 1.5K kHz
  • 10mm T-Yoke + 10mm Washer
  • Sensitivity: 85dB
  • Sealed Enclosure Volume: 0.55 – 0.95 Cubic Feet
  • Vented/Ported Enclosure Volume: 1.2 – 1.8 Cubic Feet
  • Xmax is 27MM
  • Weight: 29.75 Lbs.
  • Shipping Weight: 31.95 Lbs.
  • Shipping Box Dimensions: 13.38" x 12.2" x 13.38" Inches
  • XMAX: 26 MM

Detailed Info:

  • Body: Non-Pressed Paper
  • Gap Plate Inside Diameter: 95mm (3.54 inches)
  • Gap Plate Outside Diameter: 190mm (7.5 inches)
  • Gap Plate Thickness: 25mm (1 inch)
  • Yoke Outside Diameter: 180mm (7.1 inches)
  • Yoke Thickness: 10mm (0.4 inches)
  • Yoke Pole Diameter: 75mm (3 inches)

TS Parameters:

  Series
Fs  32.745 Hz
Qms 4.552
Cms  88.295m mm/N 
Bl    21.32 N/A  
Zmin    6.18 O  
Re   4 O   
Qes  0.484
Mms      267.548 g
dBspl       81.8
Sd 0.033m²
Qts 0.438
VAS   13.659 L tr

 


 

Krypton Series (Product Video):

What's in the Box:

  • Amplifier
  • Bass Remote with clipping indicator
  • Birth sheet with tested power
  • Owner’s manual
  • Mounting Screws
  • Warranty

Description of Krypton M2:

The Krypton series of amplifiers by Rockville are engineered to be reliable and are packed with features. Whether you are a car audio competitor or just like to enjoy loud music we engineered and designed these amps from the ground up to give you great sound quality. You will notice the cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.

Our favorite feature of the Krypton series is the bass remote that has a clipping indicator. This allows you to set the amp to max output before clipping on any song. This will protect your subs while you maximize SPL. What is nice about this is that you can set the gain level to max before clipping on any given song in real time! If you use a DD-1 or another tool, you are setting the gain on one song but the next song might have more headroom or might clip depending on the levels it was recorded at (this is referred to as crest factor in the engineering world).

We guarantee that this series of amplifiers will not only meet their Dyno Certified power but exceed their rated power.

Another feature we love about this is the bass equalizer. Most amps have this feature however not all bass EQ's are created equal. Some bass EQ's will just clip your subs to death. Our bass EQ circuitry will boost the proper frequencies in a way that sounds good and is safe for your subs. In addition you can always use the clip indicator on the bass remote to make sure you are not sending a clipped signal to your subs. Our amplifier is meant to give as much clean power to your subs as possible. Our voltage display allows you to make sure you are getting the proper voltage to your amp and our clip indicator on the remote will make sure you always send clean power to your subs. In addition we also guarantee the amplifier will output over the Dyno Certified so you can confidently match our amplifier with high-end subs and know what to expect!

What about sound quality and efficiency ??
This amplifier is engineered so well that it has an extremely low signal to noise ratio which means the sound will be super clean even at high volume levels. It also has a great efficiency rating so you don't have to draw too much power from your battery. We engineered this to have a high common mode rejection rating (CMRR). This means that the amp has the capability to block out engine noise signals. By rejecting unwanted noise the end result is the cleanest sound quality.

Once again, Rockville has stepped up its game with the all new Krypton series. Their is no other amp like it on the market. The all new Phenom V2 series is in our opinion the best series of amps for the price. Between the true power, the build quality, and the features, we are confident you will agree.

Features:

  • Rockville KRYPTON-M2 3000w Peak/750w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
    • 1 Ohm:750 Watts x 1 Channel <1% THD+N (73.3% efficient)
    • 2 Ohm: 500 Watts x 1 Channel <1% THD+N (83.3% efficient)
    • 4 Ohm: 300 Watts x 1 Channel <1% THD+N (85.2% efficient)
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
    • 1 Ohm: 3000 Watts x 1 Channel
    • 2 Ohm: 2000 Watts x 1 Channel
    • 4 Ohm: 1200 Watts x 1 Channel
  • Digital Voltage Display on Amp (Accurate within 0.15V)
  • Power/Protect/Clip LED Indicators on the front panel
  • Power/Protect/Clip LED Indicators on Remote control
  • Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • Low Pass Filter: 50Hz - 250Hz
  • Subsonic Filter: 15Hz - 55Hz
  • Fully Adjustable 12dB Bass Equalizer
  • Remote Dashboard Subwoofer Control with Clipping Indicator
  • 8 Volt Preamp Circuitry
  • Phase Control Switch
  • High-Speed MOSFET Power Supply
  • Optical Coupler Class “D” Technology
  • Full IC-Controlled Protection Circuitry
  • Mute and Delay Soft Start System
  • RCA Preamp Line Output
  • Status Mode LED Indicator
  • Minimum THD at Rated Power: <0.1%
  • S / N Ratio: >90dB
  • Frequency Response: 15Hz - 250Hz
  • Damping Factor: >150 @ 100Hz
  • 1x 80A Maxi Fuse
  • Passes the Signal Burst Test (Instant signal for full power “SPL Contest”)
  • Rockville engineered with a super low signal to noise ratio to give you clean sound
  • Improved Bass EQ filter works well to boost the proper frequencies
  • Dimensions: (W x H x L) 12.99? x 8.66? x 2.2?

??


Video of RWK41:


Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price p

Shipping & Returns

Row content