Rockville W10K9D4 10" 3200 w Car Subwoofer+Sealed Sub Box+Mono Amplifier+Amp Kit

$743.97 $424.80 Save 43%
Shipping calculated at checkout.
Product Description

Package Includes:

  • (1) Rockville W10K9D4 V3 10" K9 3200w Peak/800w RMS Car Subwoofer DVC 4-Ohm
  • (1) Rockville RS10 Single 10” 0.75 cu.ft. 3/4” MDF Sealed Car Sub Enclosure Box
  • (1) Rockville RQB10 Single 10" Vented Ported Subwoofer Sub Box Enclosure 1.4 cu ft
  • (1) Rockville dB13 3000 Watt Peak/750w Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp
  • (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

All about your K9 Series Subwoofers:

Wiring for 1 DVC 4 Ohm SUBS:

Wiring for 2 DVC 4 Ohm SUBS:

New Page 1

Description:

The Rockville K9 series has been our best-selling series of subs and it just got even better! Say hello to the K9 V3. This sub is a game changer. We improved the performance and cooling like crazy! Our engineers did some minor tweaks that give major results for Bass heads who like to abuse subs! Weather you are an everyday user or someone who pushes the limits of your equipment the K9 V3 is for you!

We made the following upgrades that will keep the voice coil cooler improving the subs ability to take constant abuse.

1. The Dust cap was upgraded to the same one we use in our Punisher series. It is top of the line. We figured it just cost us a couple dollars extra, so why not throw on the best Dust cap.

2. We added an inner dust cap that stops heat from building up in the voice coil. We also made our pole vent smaller. The combination of these 2 changes keeps the voice coil significantly cooler when you are playing bass heavy songs or test tones.

3. We added a voice coil spacer that vastly improves the performance.

4. The cone has a smooth finish that allows the dust cap to be glued on more securely.

Features:

  • Rockville W10K9D4 V3 K9 Series 10" Dual 4-Ohm Car Subwoofer
  • Peak Power Handling: 3200 Watts
  • Program Power Handling: 1600 Watts
  • RMS Power Handling: 800 Watts
  • Ultra-stiff Non-Pressed Paper Punisher Cone
  • Ultra-stiff Polypropylene Punisher Dustcap (The K9 V3 now uses the same dustcap as our Punisher series)
  • We added an inner dustcap which helps to avoid hot air build-up in the voice coils resulting in more power handling
  • More efficient air ventilation cools the voice coil even better than our V2
  • We added a voice coil spacer improving longevity during test tones or extreme bass-heavy songs
  • 3" 4-Layer Black Aluminum Former Wound with OFC Wire Made in USA
  • This voice coil is stable up to 240 degrees celcius! The voice coil windings are made in the USA
  • Double Stacked 185 Oz High Quality Magnet
  • Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient And Lighter Weight
  • Two Chrome-Plated Binding Post Terminals
  • Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
  • White Stitching Cone Reinforcement Ensures Long Life
  • Impedance: Dual 4-Ohm Voice Coils
  • Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
  • Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
  • High BL Magnetic Motor Gap
  • We use high grade glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
  • Nomex Spider provides tear resistance, strength and long-term reliability over regular cotton and poly cotton spiders
  • Cutout Diameter: 9.37” inches
  • Mounting Depth: 6.5” inches
  • Frequency Response: 37.8 Hz - 1.5K kHz
  • 10mm T-Yoke + 10mm Washer
  • Sensitivity: 85dB
  • Sealed Enclosure Volume: 0.55 – 0.95 Cubic Feet
  • Vented/Ported Enclosure Volume: 1.2 – 1.8 Cubic Feet
  • Xmax is 27MM
  • Weight: 29.75 Lbs.
  • Shipping Weight: 31.95 Lbs.
  • Shipping Box Dimensions: 13.38" x 12.2" x 13.38" Inches
  • XMAX: 26 MM

 ​Detailed Info:

  • Body: Non-Pressed Paper
  • Gap Plate Inside Diameter: 95mm (3.54 inches)
  • Gap Plate Outside Diameter: 190mm (7.5 inches)
  • Gap Plate Thickness: 25mm (1 inch)
  • Yoke Outside Diameter: 180mm (7.1 inches)
  • Yoke Thickness: 10mm (0.4 inches)
  • Yoke Pole Diameter: 75mm (3 inches)

Video of RWK41:


Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

  • 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
  • 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
  • 17’ – 18 Gauge Blue Remote Cable
  • 17’ – 16 Gauge Clear Speaker Wire
  • 3’ – 4 Gauge Clear SuperFlex Ground Wire
  • Gold Plated AGU Heat Resistant Fuse Holder
  • 60 Amp AGU Gold Plated Fuse
  • 7’ Split Tube Loom
  • Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

Features of RQB10:

  • Rockville RQB10 Single 10" Vented Ported Subwoofer Sub Box Enclosure 1.4 cu ft
  • Single 10" Side Ported
  • Finished with Durable Bed Liner<
  • 3/4" MDF
  • High Quality Spring Loaded Terminal
  • Air Space: 1.4 Cubic Feet
  • Tuning Freq- 39Hz
  • Mounting Depth: 8"
  • Height: 11"
  • Width: 20"
  • Depth: 14"
  • Cutout diameter: 9.185"

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.


All About Your dB13:

Shipping & Returns

Row content