Skip to product information
1 of 13

MTX

3510-04 Pair + dB12 Amp + RWK41 4-Gauge Wiring Kit

3510-04 Pair + dB12 Amp + RWK41 4-Gauge Wiring Kit

Car Audio Subwoofer Bundle, Two 10-Inch 4-Ohm Subs, 500W RMS 2-Ohm Mono Amp, 4-Gauge Install Kit

Free Shipping

Regular price $329.85
Sale price $329.85 Regular price $489.89
Save 32%
Shipping calculated at checkout.
Features
    • Two 10-inch single-voice-coil subwoofers rated at 250W RMS each
    • 500W RMS mono amplifier output at 2 ohms
    • Adjustable 12dB/octave crossover, subsonic filter, and bass equalizer
    • 4-gauge kit includes copper RCA cables, power leads, and remote wire
    • Sealed or vented enclosure recommendations for each subwoofer
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • (2) 3510-04 10-inch, 4-ohm subwoofers
    • (1) dB12 mono amplifier
    • (1) RWK41 4-gauge amplifier wiring kit
    • Bass remote
    • Power test birth sheet
    • Mounting screws
    • 17-foot twisted-pair, 100% copper RCA cable
    • 17-foot 4-gauge translucent blue power cables
    • 17-foot 18-gauge blue remote cable
    • 17-foot 16-gauge translucent blue cable
    • 3-foot 4-gauge translucent black ground wire
    • Gold-plated AGU heat-resistant fuse holder and AGU fuse
    • 7-foot split loom tube
    • Wire ties, ring terminals, butt connectors, spades, and grommets

SKU: SKU: (2) 3510-04+dB12+RWK41

View full details

Product Description

Build a complete car-audio bass system with two 10-inch 3510-04 subwoofers, a dB12 mono amplifier, and a 4-gauge wiring kit in one bundle. Each subwoofer is rated at 250W RMS and 500W peak, with a 4-ohm single voice coil and a recommended amplifier range of 125 to 250W RMS. The amplifier is rated at 500W RMS at 2 ohms and 300W RMS at 4 ohms, with adjustable crossover, subsonic filter, bass equalizer, phase control, and a dashboard subwoofer remote. The amp’s 500W RMS output at 2 ohms matches the pair’s combined 500W RMS handling only when wired for a 2-ohm load; verify final wiring and load before installation. The included installation kit supplies 4-gauge power and ground cables, RCA signal cables, remote wire, fuse hardware, split loom, and connection accessories. The subwoofers support sealed or vented enclosures, with recommended net volumes of 0.75 cu ft sealed or 2.0 cu ft vented per subwoofer.

Features

    • Balanced Pair Of Subwoofers

      Two 10-inch, 4-ohm single-voice-coil subs handle 250W RMS each, letting the pair match the amplifier’s 500W RMS output at 2 ohms when wired accordingly.

    • Adjustable Tone Controls

      The 12dB-per-octave crossover, subsonic filter, bass equalizer, and phase switch give installers control over low-frequency response for the chosen enclosure and vehicle.

    • Choose An Enclosure

      Per-subwoofer recommendations call for 0.75 cu ft net in a sealed enclosure or 2.0 cu ft net in a vented design, guiding enclosure selection.

    • Prepared For Installation

      The 4-gauge kit supplies power and ground cables, remote wire, copper RCA leads, fuse hardware, split loom, and common connection pieces in one package.

    • Simple System Control

      A dashboard subwoofer remote, adjustable phase control, mute and delay soft-start, and mono amplifier layout put key adjustments within reach during setup.

Technical Specifications

  • Product Type Car Audio Subwoofer Bundle
  • Subwoofer Quantity 2
  • Subwoofer Size 10 in
  • Voice Coil Single, 1.75 in
  • Subwoofer Impedance 4 ohms each
  • Subwoofer RMS Power Handling 250 W each
  • Subwoofer Peak Power Handling 500 W each
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov