Home / AMERICAN DJ /

SPLC1

Product Description Specifications

SPLC1

  • SPLC1
  • SPLC1
1 2

AMERICAN DJ

SPLC1

SPLC1

Locking Power Link Cable, 1.5', Twist-Lock Connectors Both Ends, Fixture Power Daisy Chain
$40.99
$40.99 $47.95
Save 14%
Shipping calculated at checkout.
Features
    • 1.5' / 0.46 m link cable for chaining power between fixtures
    • Twist-lock power connectors on both ends match linkable fixture sockets
    • Cuts the number of extension cords running back to an outlet
    • Quarter-turn connectors lock so a bumped cable will not kill a fixture
    • Keeps cable runs short and tidy between fixtures on the same truss
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Locking Power Link Cable

SKU: SPLC1

View full details

Product Description

The SPLC1 links power from one fixture to the next. Both ends use locking twist-lock power connectors, matching the power input and output sockets found on LED pars, moving heads, and effect lights that support power daisy chaining.

Chaining does two useful things. It cuts the number of extension cords running back to a distro or wall outlet, and it keeps the cable between fixtures short, which means less to tape down and less to trip over. At 1.5' / 0.46 m, this length suits fixtures clamped side by side on the same bar or truss section.

The quarter-turn connectors lock, so a fixture at the end of a chain will not lose power when a cable gets bumped during a set. Check the daisy-chain limit printed on your fixtures before building a long run: total current draw sets the ceiling, not the number of cables. Intended for indoor use on mobile rigs, club and bar installs, band backlines, and school or church stages.

Features

    • Chain Fixtures Off One Outlet

      Twist-lock connectors on both ends carry power from one fixture to the next, so a row of linkable units runs from a single outlet or distro feed.

    • Stays Connected Mid-Show

      Each connector seats with a quarter turn and locks, so a bumped or tugged cable will not cut power to the fixtures downstream of it.

    • Right Length For The Gap

      At 1.5' / 0.46 m, it bridges fixtures clamped side by side on the same bar, with no loop of slack cable left hanging in view.

    • Fewer Cables On Deck

      Chaining power between fixtures removes the extra extension cords that otherwise snake back to the outlet, leaving less to tape down at load-in.

    • Fits Standard Linkable Fixtures

      The locking connectors match the power input and output sockets used on LED pars, moving heads, and effect lights that support power daisy chaining.

Technical Specifications

  • Product Type Locking Power Link Cable
  • Connector 1 Locking Twist-Lock Power Connector
  • Connector 2 Locking Twist-Lock Power Connector
  • Cable Length 1.5' / 0.46 m
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov