Audio Technica AT2035 Side Address Cardioid Condenser Studio Microphone/Mic+Case
Audio Technica AT2035 Side Address Cardioid Condenser Studio Microphone/Mic+Case
AUDIO TECHNICA
Audio Technica AT2035 Side Address Cardioid Condenser Studio Microphone/Mic+Case
Audio Technica AT2035 Side Address Cardioid Condenser Studio Microphone/Mic+Case
Side-Address Cardioid Condenser Studio Microphone, 20-20,000 Hz, Includes Shock Mount, Protective Pouch
Free Shipping
Features
- Large-diaphragm cardioid condenser for vocals, acoustic guitar, and live use
- Switchable 80 Hz high-pass filter cuts stage rumble and low-end noise
- 10 dB pad raises maximum input to 158 dB SPL for loud sources
- Low 12 dB SPL self-noise keeps quiet sources clear of hiss
- AT8458 shock mount isolates the mic from stand and floor vibration
Couldn't load pickup availability
What's Included in the box
- AT2035 Side-Address Cardioid Condenser Microphone
- AT8458 Shock Mount for 5/8"-27 Threaded Stands
- 5/8"-27 to 3/8"-16 Threaded Adapter
- Soft Protective Pouch
SKU: SKU: AT2035
View full details






Product Description
Two switches handle problem sources. The 80 Hz high-pass filter cuts rumble from traffic, HVAC, and stage vibration while leaving vocal body intact. The 10 dB pad raises maximum input to 158 dB SPL, so the mic holds together in front of a guitar cabinet, a snare, or a loud singer.
The cardioid pattern rejects sound from the sides and rear, which improves isolation when tracking two performers in one room or when a monitor wedge sits nearby onstage. Frequency response runs 20-20,000 Hz, and surface-mount electronics keep performance consistent from unit to unit.
The included AT8458 shock mount isolates the capsule from floor and stand vibration and threads onto any 5/8 inch-27 stand, with a 3/8 inch-16 adapter for other hardware. A soft pouch protects the mic between sessions.
Phantom power of 11-52V DC comes from any standard interface, mixer, or preamp. Use it for lead vocals, voiceover, podcast tracking, acoustic guitar, piano, and drum overheads.
Features
-
Detail Without the Hiss
A 12 dB SPL noise floor and large diaphragm let you record soft vocals and fingerpicked guitar without a layer of hiss sitting under the take.
-
Headroom for Loud Sources
The switchable 10 dB pad lifts maximum input to 158 dB SPL, so the mic stays clean in front of a guitar cabinet or drum kit.
-
Cut Rumble at the Source
An 80 Hz high-pass filter rolls off low-frequency noise from traffic, air handling, and stage vibration before it ever reaches your recording.
-
Focus on One Sound Source
The cardioid pattern rejects sound from the sides and rear, improving isolation when two performers track together or a stage monitor sits nearby.
-
Quiet Mounting Included
The AT8458 shock mount suspends the microphone away from stand-borne vibration and fits 5/8 inch-27 stands, with an adapter for 3/8 inch-16 hardware.
Technical Specifications
- Product Type Side-Address Cardioid Condenser Microphone
- Element Fixed-charge back plate, permanently polarized condenser
- Polar Pattern Cardioid
- Frequency Response 20-20,000 Hz
- Low Frequency Roll-Off 80 Hz, 12 dB/octave
- Open Circuit Sensitivity -33 dB (22.4 mV) re 1V at 1 Pa
- Impedance 120 ohms
- Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL with 10 dB pad
- Noise 12 dB SPL
- Dynamic Range 136 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio 82 dB, 1 kHz at 1 Pa
- Phantom Power Requirements 11-52V DC, 3.8 mA typical
- Switches Flat, roll-off; 10 dB pad
- Output Connector Integral 3-pin XLRM-type
- Weight 0.89 lb (403 g)
- Dimensions 6.69 in. long, 2.05 in. maximum body diameter