Audio-Technica ATW-1426 Digital Wireless Microphone Receiver+(2) Boundary Mics

The ATW-1426 puts two wireless boundary microphones on a conference table with no cables to run. It includes the ATW-R1440 four-channel receiver and two ATW-T1406 boundary microphone transmitters, each with a cardioid condenser capsule that handles up to 139 dB SPL.

Because the transmitter is built into the boundary housing, setup is a matter of placing the mics and powering them on. That suits rented rooms, board rooms without floor boxes, and hybrid meeting spaces where furniture moves week to week.

Operation is plug-and-play at 24-bit/48 kHz in the 2.4 GHz range. Standard mode supports 10 channels at 2.8 ms latency, HD mode supports 20 channels at 6.7 ms, and two receiver channels stay open for body-pack or handheld transmitters.

Each boundary mic carries a built-in 3.7V lithium-ion battery good for about 12 hours, recharging over USB Type-C in roughly 3 hours 10 minutes. USB power adapters and cables are included. AES128 encryption protects meeting audio, auto-lock stops accidental changes mid-session, and Syslog and Wireless Manager support give IT teams centralized monitoring. Receiver units also mount remotely up to 328 feet away over Ethernet, and up to five chassis link together.