CDi2000 + (2) Control 25-1-WH Pairs
CROWN
CDi2000 + (2) Control 25-1-WH Pairs
CDi2000 + (2) Control 25-1-WH Pairs
Commercial Audio System, 2-Channel 800W/Channel Amplifier, Four 5.25-Inch Speakers
Features
- Two-channel amplifier rated at 800W per channel at 4 ohms
- Supports 2-, 4-, and 8-ohm loads plus 70V and 140V outputs
- Onboard DSP includes crossovers, EQ, delay, and output limiting
- Four 5.25-inch two-way speakers with 100° x 100° coverage
- IP-44 weather-protected enclosures with hidden-access wall mounts
Couldn't load pickup availability
What's Included in the box
- (1) CDi2000 2-Channel Commercial Power Amplifier
- (2) Pairs of Control 25-1-WH 5.25-Inch Wall-Mount Speakers (4 speakers total)
SKU: SKU: CDI2000+(2) CONTROL 25-1-WH
View full details










Product Description
Features
Flexible Load Options
With ratings for 2-, 4-, and 8-ohm loads plus 70V and 140V outputs, the amplifier can serve low-impedance or distributed-line installations.
Preset-Based DSP
Onboard crossovers, EQ filters, delay, and output limiting shape system response, while storage for up to 20 user-defined presets supports repeat setup changes.
Broad Speaker Coverage
Each 5.25-inch two-way speaker covers 100° x 100°, helping distribute background music and paging across dining rooms, lobbies, and other shared areas.
Indoor And Outdoor Construction
IP-44-rated weather-protected enclosures, zinc-plated grilles, and high-impact polystyrene cabinets are specified for exposure to humidity, temperature changes, and salt spray.
Concealed Wall Mounting
Hidden-access mounting hardware sits behind the speaker logo badge, keeping the attachment point out of view in restaurants, gyms, and other public spaces.
Technical Specifications
- Product Type Commercial Audio Package (Amplifier and Wall-Mount Speakers)
- Amplifier Channels 2
- Amplifier Rated Power Output (per channel @ 4 ohms) 800W Stereo
- Amplifier Supported Loads and Outputs 2-, 4-, and 8-ohm loads; 70V and 140V outputs
- Amplifier Sensitivity (for full rated power at 8 ohms) 1.4V
- Amplifier Signal-to-Noise Ratio (below rated 1 kHz power at 8 ohms) 100 dB (A-weighted)
- Amplifier THD Less than 0.5%
- Amplifier Damping Factor (20 Hz to 400 Hz) > 500
- Amplifier Frequency Response (at 1W, 20 Hz to 20 kHz) + 0 dB, -1 dB
- Amplifier Crosstalk (below rated power, 20 Hz to 1 kHz) >70 dB
- Amplifier Input Impedance 20k ohms balanced, 10k ohms unbalanced
- Amplifier IEC Power Connector 15A
- Speaker Quantity 4
- Speaker LF Driver Size 5.25" / 135 mm
- Speaker HF Driver Size 0.75" / 19 mm
- Speaker Power Ratings Features list 200W RMS at 8 ohms; detailed specs list 200 W continuous program (2 h), 100 W (400 W peak) continuous pink noise (2 h), and 75 W (300 W peak) continuous pink noise (100 h)
- Speaker Nominal Impedance 8 ohms (THRU setting)
- Speaker Maximum Input Voltage 25.3 V RMS (2 h), 50.6 V peak
- Speaker Frequency Response (+/- 3 dB) 85 Hz to 17 kHz
- Speaker Frequency Response (+/- 10 dB) 60 Hz to 20 kHz
- Speaker Sensitivity 90 dB, 1 W / 1 m (average 100 Hz to 10 k Hz)
- Speaker Coverage Angle 100° x 100°
- Speaker Directivity Factor 6.0 (averaged 1 kHz to 16 kHz)
- Speaker Directivity Index 7.6 dB (averaged 1 kHz to 16 kHz)
- Speaker Crossover Type 2nd order low-pass, 2nd order high-pass
- Speaker Transformer Taps 70 V: 30 W, 15 W, 7.5 W, 3.7 W; 100 V: 30 W, 15 W, 7.5 W; THRU: 8 ohms nominal
- Speaker Recommended Protective High-Pass 60 Hz high-pass (24 dB/oct) for 8-ohm operation and all 70 V / 100 V tap settings
- Speaker Enclosure Material High-impact polystyrene (HIPS)
- Speaker Grille Highly zinc-plated, finished in durable TGIC polyester powder-coating
- Speaker Termination Screw-down terminal strip; accepts open lugs and bare wire up to 12 AWG / 2.5 mm2
- Speaker Environmental Rating IP-44 per IEC529; exceeds MilSpec 810 for humidity, salt spray, temperature, and UV; passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray
- Speaker Agency Rating ROHS-compliant; transformer UL Recognized per UL1876
- Amplifier Weight 22.0 lb
- Speaker Weight (each) 7.5 lb / 3.4 kg
- Amplifier Dimensions 3.5" x 19" x 12.25"
- Speaker Dimensions (H x W x D) 9.6 x 7.4 x 5.7" / 243 x 188 x 145 mm