CSMA1120 Mixer Amp + (2) WET-6525W Outdoor Wall Speakers
JBL
CSMA1120 Mixer Amp + (2) WET-6525W Outdoor Wall Speakers
CSMA1120 Mixer Amp + (2) WET-6525W Outdoor Wall Speakers
70V System, 120W 1U Mixer Amp, Two 6.5" IPX55 White Wall Speakers for Patios and Bars
Free Shipping
Features
- Complete 70V system with a 120W mixer amp and two 6.5" white indoor/outdoor wall speakers
- IPX55 speakers use rustproof aluminum grills and salt spray tested steel brackets
- 4-way swivel brackets angle each speaker up, down, left, or right toward listeners
- 70V taps at 30W, 15W, 7.5W, and 3.75W let you set the level for each speaker
- Fanless 1U mixer amp with four inputs, priority muting, and bass and treble controls
Couldn't load pickup availability
What's Included in the box
- (1) JBL CSMA1120 120W Commercial 70V Mixer Amplifier
- (1) Rack Mounting Kit
- (2) Rockville WET-6525W 6.5" 70V Indoor/Outdoor Wall Speakers with Swivel Brackets (White)
SKU: SKU: CSMA1120+(2) WET-6525W
View full details














Product Description
Each WET-6525W is IPX55 rated for indoor or outdoor use, built with a waterproof plastic cabinet, a rustproof aluminum grill, waterproof spring-loaded terminals, and powder coated steel brackets that pass a 96-hour salt water spray test. The 4-way swivel bracket tilts each speaker up, down, left, or right so sound lands on the seating area rather than the far wall. A 6.5" polypropylene woofer and 20mm PEI dome tweeter share a vented enclosure tuned for full bass and natural highs across a 55Hz to 20kHz range.
The tap switch on each speaker sets 30W, 15W, 7.5W, or 3.75W on the 70V line, and two speakers at the top tap draw only half of the amp's 120W, leaving headroom to add more 70V speakers later. The CSMA1120 packs four inputs into a fanless 1U chassis with a rack mounting kit, priority muting for announcements, bass and treble controls, and RJ45 connectors for JBL CSR-V wall volume controls. Its universal power supply accepts 100 to 240V.
Features
Complete Outdoor Sound in One Order
The CSMA1120 mixer amp and two WET-6525W wall speakers arrive together, giving a patio, pool deck, or bar a full music and paging setup without sourcing parts separately.
Clean White Finish for Bright Spaces
White cabinets and grills blend into light walls, stucco, and painted trim, so the speakers sit quietly in hotel, cafe, and retail decor while still delivering full sound.
Built for Rain, Sun, and Salt Air
IPX55 cabinets, rustproof aluminum grills, waterproof terminals, and brackets that pass a 96-hour salt spray test stand up to heavy rain, sun, and dust.
Aim Sound Where People Sit
The 4-way swivel bracket tilts each speaker up, down, left, or right, so you can point audio at seating areas instead of empty walls or walkways.
Room to Grow the System
Two speakers at the 30W tap use half the amp's 120W rating, and priority muting lowers music for announcements, leaving headroom to add more 70V speakers as you expand.
Technical Specifications
- Product Type 70V Commercial Mixer Amplifier and Indoor/Outdoor Wall Speaker System
- Amplifier Output 120W @ 4/8 Ohms
- Mixer Inputs 4
- Output Channels 1
- Distributed Audio 70V and 100V, No Separate Transformer Needed
- Load Impedance Stable from 2 to 16 Ohms
- Input Sensitivity 1.4Vrms
- Signal to Noise Ratio Greater than 100 dB (1kHz, A-weighted)
- Input Impedance Balanced 20K Ohms / Unbalanced 10K Ohms
- Max Input +20dBu Typical
- Rack Size 1U
- Cooling Fanless
- AC Line Voltage 100-240V, 50/60 Hz
- Remote Volume Control RJ45, JBL CSR-V Compatible
- Speakers Included (2) WET-6525W
- Speaker Woofer 6.5" Polypropylene Cone
- Speaker Tweeter 20mm PEI Dome
- Enclosure Vented, Waterproof Plastic
- Grill Aluminum
- Weather Rating IPX55
- Mounting 4-Way Swivel Bracket, Powder Coated Steel
- 70V Taps 30W, 15W, 7.5W, 3.75W
- 8 Ohm Power Handling 40W RMS
- Nominal Impedance 8 Ohms
- Speaker Sensitivity 85 dB ±2 dB
- Speaker Frequency Response 55 Hz - 20 kHz
- Color White
- Amplifier Shipping Weight 10.1 lb (4.6 kg)
- Speaker Weight 6.94 lb (3.15 kg) each
- Amplifier Dimensions 1.7" x 8.6" x 11.9" (43.3 x 218.5 x 303.4 mm)
- Speaker Dimensions 12.21" x 7.4" x 7.3" (310 x 188 x 186 mm)