CSMA280 Amplifier + (2) CSR-V Wall Controls
JBL
CSMA280 Amplifier + (2) CSR-V Wall Controls
CSMA280 Amplifier + (2) CSR-V Wall Controls
2 x 80W Commercial Mixer Amplifier, 8 Inputs, 70V/100V, Includes (2) Black CSR-V Wall Volume Controls
Free Shipping
Features
- 8-input mixer amplifier with two 80W output channels for two-zone commercial audio
- Built-in transformer runs 70V and 100V speaker lines or 4 and 8 ohm loads directly
- Includes (2) black CSR-V wall volume controls that connect over Cat 5 up to 1000 ft
- Voice activated ducking and priority muting for clear paging over background music
- 27V phantom power, euroblock mic/line inputs, and RCA inputs for a wide source mix
Couldn't load pickup availability
What's Included in the box
- (1) JBL CSMA280 Commercial Mixer Amplifier
- (2) JBL CSR-V Wall Volume Controllers, Black
SKU: SKU: CSMA280+(2) CSR-V-BLK
View full details










Product Description
Each CSR-V connects to one of the amplifier's two RJ45 remote volume ports over standard Cat 5 cable with runs up to 1000 ft, so both zones get wall-mounted volume control out of the box. Voice activated ducking on channels 1 and 5 lowers the music automatically when someone speaks into a paging mic, and priority muting cuts every other channel for announcements, even waking the amp from sleep mode. Euroblock and RCA inputs accept mics, music players, and streaming sources, 27V phantom power runs condenser mics, and independent bass and treble controls let you tune each zone to its room. An auxiliary output feeds additional amplifiers when the system grows, and sleep mode powers the unit down after about 30 minutes without signal to cut idle energy use.
Features
Two Zones From One Amp
Two 80W output channels with independent volume, bass, and treble let a single CSMA280 cover a dining room and patio or a sales floor and office.
Wall Controls Included
Both CSR-V controllers plug into the amp's two RJ45 remote ports over Cat 5 cable, giving staff volume control for each zone right where they work.
Direct Distributed Audio Support
The Hi-Z switch engages a built-in transformer to run 70V or 100V speaker lines directly, so long ceiling speaker runs need no extra transformer hardware.
Paging That Cuts Through
Voice activated ducking on channels 1 and 5 lowers the music when someone talks, and priority muting silences other channels for important announcements.
Power Saving Sleep Mode
The amp powers down after about 30 minutes without signal and wakes automatically when audio returns or a priority page comes in, cutting idle energy use.
Technical Specifications
- Product Type Commercial Mixer Amplifier with Wall Volume Controls
- Input Channels 8
- Output Channels 2
- Output Power 2 x 80W
- Output Modes 4 ohm, 8 ohm, 70V, 100V
- Frequency Response (4/8 Ohm) 20 Hz - 20 kHz, ±2 dB
- Frequency Response (70V/100V) 80 Hz - 15 kHz, ±2 dB
- THD Less than 0.5%, 20 Hz to 20 kHz
- Signal to Noise Ratio Greater than 90 dB
- Crosstalk -70 dB @ 1 kHz
- Phantom Power 27 VDC
- Inputs Euroblock Mic/Line, Dual RCA
- Remote Volume Ports 2 x RJ45
- Wall Controller CSR-V, Black, Cat 5 with RJ45, Up to 1000 ft
- AC Input 100-240 VAC, 50/60 Hz
- Certifications Energy Star, RoHS
- Amplifier Weight 11.9 lb (5.4 kg)
- Amplifier Dimensions (W x D x H) 17.2 x 11.9 x 1.7 in (436.9 x 302.3 x 43.2 mm)