CSMA280 + (8) WET-5W White Wall Speaker System
JBL
CSMA280 + (8) WET-5W White Wall Speaker System
CSMA280 + (8) WET-5W White Wall Speaker System
Indoor/Outdoor Paging and Music System, 2 x 80W 70V/100V Mixer Amp, (8) 5.25" White Wall Speakers
Features
- CSMA280 mixer amplifier delivers 2 x 80W with direct 70V and 100V outputs
- Eight WET-5W 5.25" wall speakers in white, ready for two four-speaker zones
- IPX55-rated vented ABS cabinets and aluminum grilles hold up indoors or outdoors
- 70V taps from 2.5W to 20W set each speaker's level on the line
- Voice-activated ducking and priority muting bring pages over background music
Couldn't load pickup availability
What's Included in the box
- (1) JBL CSMA280 Commercial Mixer Amplifier
- (8) Rockville WET-5W 5.25" 70V Indoor/Outdoor Wall Speakers, White
- (8) Stainless Steel Swivel Wall Brackets
SKU: SKU: CSMA280+(8) WET-5W
View full details












Product Description
The CSMA280 puts out 2 x 80W and runs 70V or 100V lines directly through its built-in Hi-Z transformer, so long speaker runs wire straight to the amp with no extra hardware. Put four speakers on each output to create two zones, such as a dining room and a patio, each with its own volume, bass, and treble. Eight inputs handle daily use: mic/line euroblock inputs with 27V phantom power for paging mics and RCA inputs for a music source. Voice-activated ducking on channels 1 and 5 lowers the music when someone speaks, and priority muting clears the other inputs for announcements. Two RJ45 ports accept JBL CSR-V wall volume controls (sold separately).
Each WET-5W uses a vented ABS cabinet with a waterproof cloth over the vent, so sound gets out and water stays out, giving these IPX55-rated speakers fuller bass than a typical sealed outdoor cabinet. The aluminum grille, stainless steel bracket, and waterproof terminals resist rust. Slide each speaker onto its swivel bracket, tighten the knobs, and aim it at the seating area. Tap selectors at 2.5W, 5W, 10W, and 20W let you run the patio louder and the entry quieter; keep each channel at 64W or less, for example two speakers at 20W and two at 10W per side.
Included in the Bundle
-
CSMA280
The JBL CSMA 280 is an eight-input, two-output mixer-amplifier rated at 80 W per channel for two-zone commercial installations. Eight input channels accept microphones, guitars and playback sources through euro-block and unbalanced RCA connections, and two outputs let separate areas run at separate levels.
Learn More: CSMA280
Features
Two Zones, Inside and Out
Wire four white WET-5W speakers to each 80W output of the CSMA280 to run an indoor dining room and an outdoor patio as separate zones with their own tone controls.
Bass That Holds Up Outdoors
A vented ABS cabinet with a waterproof cloth over the port lets the 5.25" speaker produce fuller bass while keeping rain and spray out of the enclosure.
Built for the Weather
IPX55-rated construction, a rustproof aluminum grille, stainless steel brackets, and waterproof terminals let each speaker handle rain, sun, dust, and jets of water from any angle.
Set the Level at Each Speaker
Tap selectors at 20W, 10W, 5W, and 2.5W let you run the patio louder and the hallway quieter, all on one 70V line from the amp.
Announcements Come Through Clearly
Voice-activated ducking on channels 1 and 5 lowers the music when someone speaks into a paging mic, and priority muting silences other inputs for calls.
Technical Specifications
- Product Type Indoor/Outdoor 70V Wall Speaker System with Mixer Amplifier
- Amplifier Output Power 2 x 80W
- Amplifier Channels 8 Inputs, 2 Outputs
- Amplifier Outputs 4 Ohm, 8 Ohm, 70V, 100V
- Inputs Mic/Line Euroblock, RCA
- Phantom Power 27 VDC
- Frequency Response (4/8 Ohm) 20 Hz - 20 kHz, ±2 dB
- Frequency Response (70V/100V) 80 Hz - 15 kHz, ±2 dB
- Signal to Noise Ratio Greater than 90 dB
- Remote Volume 2 x RJ45 for CSR-V Controllers (sold separately)
- AC Input 100-240 VAC, 50/60 Hz
- Speaker Quantity 8
- Speaker Color White
- Speaker Woofer 5.25" Polypropylene Cone
- Speaker Tweeter 1" Mylar Dome
- Speaker Frequency Response 60 Hz - 20 kHz
- Speaker Sensitivity 86 dB
- Speaker 70V Taps 20W, 10W, 5W, 2.5W
- Speaker 8 Ohm Power Handling 40W RMS
- Weather Rating IPX55
- Speaker Enclosure Vented ABS Cabinet, Aluminum Grille
- Speaker Mounting Stainless Steel Swivel Bracket
- Weight Amplifier: 11.9 lb, Speakers: 4.6 lb each
- Dimensions Amplifier: 17.2 x 11.9 x 1.7" (W x D x H), Speakers: 9.6 x 7.1 x 7.5"