Eliminator Lighting Elektron Bar FX RGB SMD LED DMX Strobe/Blinder Effect Light

The Elektron Bar FX is a one-meter strobe and blinder bar that runs two light sources at once. Seven 40W amber LEDs at 1800K handle blinder hits with a warm tungsten character, and 528 RGB SMD LEDs (0.5W, 5050) fill the bar with color chases and eye candy between those hits.

The two sources are controlled separately across seven amber zones and 66 RGB zones. That layout gives you chases, split looks, and pixel-style effects across the full meter without a media server. Sixty built-in programs with speed control cover most walk-in and sound-active needs, and DMX512 runs in 7, 12, or 20-channel modes when a console takes over. Primary/secondary linking keeps multiple bars in step.

Dimming runs 0-100% with six dim mode presets and four dim curves, and the shutter goes from 0 to 20 strobe flashes per second. A refresh rate spanning 900Hz to 25kHz keeps the fixture clean on camera. A 4-button digital display handles setup.

Physical features are built for the road: IP20 locking power in/out, IP20-rated locking 3-pin DMX in/out, a fused supply, two adjustable mounting brackets for floor or truss use, and a three-fan cooling system for long runs. Max power consumption is 300W at 120V, and up to seven units power link on one 120V circuit.

At 39.5 inches long the bar suits DJs, small stages, clubs, and event productions that want blinder impact without a heavy truss load.