Eliminator Mini Par RGBW LED DMX Par Wash Light For DJ/Stage/Clubs/Bars/Events

The Mini Par RGBW LED is a small-format wash par for rooms where a full-size fixture will not fit. Twelve 1W LEDs (three red, three green, three blue, three white) mix a wide color range, and the plastic housing keeps weight at 1 lb, so it hangs from light truss, pipe or a bracket without adding load.

The 25-degree beam is tight enough to pick out a column or a corner and wide enough to wash a section of wall. At 6 in x 5.75 in x 3.75 in, the fixture tucks behind furniture, under a DJ facade, into a bar soffit or along the front edge of a small stage. Total draw is 14W on 100-240V, so a row of them runs off a single circuit.

Four operating modes handle both cued and casual shows. DMX gives full control across three channel modes (4, 6 or 8 channels), while sound-activated, auto and primary/secondary modes run color changing, color fading, static color and strobing without a console. A 4-button digital display keeps setup simple, and 3-pin DMX in/out chains fixtures across a room on one line.

Typical uses include uplighting at weddings and banquets, color accents in bars and lounges, wash light for small club stages, and portable setups for mobile DJs and house parties. The included hanging bracket clamps to truss or pipe and folds flat so the fixture can sit on the floor and shoot upward.

It works equally well as a permanent accent light and as a piece of gear that lives in a case between gigs.