Hifonics TPS-A500.1 500w Mono Marine Sub Amplifier For Polaris RZR/ATV/UTV/Cart
HIFONICS
Hifonics TPS-A500.1 500w Mono Marine Sub Amplifier For Polaris RZR/ATV/UTV/Cart
Hifonics TPS-A500.1 500w Mono Marine Sub Amplifier For Polaris RZR/ATV/UTV/Cart
Mono Class D Powersports Amplifier, 500W At 2 Ohms, Marine Grade, Quick-Disconnect Wiring
Free Shipping
Features
- 1 x 500W at 2 ohms and 1 x 250W at 4 ohms
- ABYC and ASTM certified with conformal coated circuit boards
- Gold-plated power, ground, speaker, and RCA connections
- Quick-disconnect wiring for fast removal and storage
- Compact 3.70in x 5.51in x 1.77in chassis weighing 2.09 lb
Couldn't load pickup availability
What's Included in the box
- Hifonics TPS-A500.1 Mono Powersports Amplifier
- Quick-Disconnect Wiring Harness
SKU: SKU: TPS-A500.1
View full details









Product Description
Marine grade protection is why it survives out there. The amplifier meets ABYC and ASTM requirements with conformal coated circuit boards that resist salt spray and moisture, and gold-plated power, ground, speaker, and RCA connections fight corrosion at every contact point. Water resistance is built into the design rather than added later.
Installation uses quick-disconnect wiring, so the amplifier comes out in minutes for winter storage or to keep it out of sight when the machine is parked. Molex connectors handle 10 gauge power and the speaker output, and a single 30A fuse protects the circuit.
Tuning includes a switchable 300Hz low-pass filter, 0 to 12dB of bass boost at 45Hz, a 60Hz subsonic filter, and input sensitivity from 0.2V to 9V, which covers a phone-fed source or a factory-style head unit. Full Range Class-D topology produces the output from a small aluminum heat sink, with signal-to-noise rated above 100dB and 10Hz to 300Hz response. Three-stage protection circuits monitor thermal, overload, DC, and speaker short conditions with lighted indicators on the end panel. The chassis measures 3.70in x 5.51in x 1.77in and weighs 2.09 lb.
Features
-
Built For Salt And Spray
ABYC and ASTM certification means conformal coated circuit boards and gold-plated connections that resist corrosion from salt spray, rain, and washdowns.
-
Out In Minutes
Quick-disconnect wiring lets the amplifier come off the machine for winter storage or security, then go back on without redoing any of the wiring.
-
Fits The Machine
A 3.70in x 5.51in x 1.77in chassis weighing 2.09 lb mounts under a seat or behind a panel on a RZR, ATV, UTV, or cart.
-
Bass Tuning On Board
A switchable 300Hz low-pass, a 60Hz subsonic filter, and 0-12dB bass boost at 45Hz keep the subwoofer working inside its useful range.
-
Protected Three Ways
Three-stage protection circuits watch thermal, overload, DC, and speaker short conditions, with lighted indicators on the end panel showing status at a glance.
Technical Specifications
- Product Type Mono Powersports and Marine Subwoofer Amplifier
- Series THOR
- Amp Class Full Range Class D
- Total Channels 1 (Mono)
- Power @ 2 Ohms 1 x 500W
- Power @ 4 Ohms 1 x 250W
- Crossover Type Electronic, 12dB Per Octave
- Low Pass Filter Switchable 300Hz
- Subsonic Filter 60Hz
- Bass Boost 0-12dB @ 45Hz
- Input Sensitivity 0.2V-9V
- Signal to Noise Ratio Greater than 100dB
- Frequency Response 10Hz-300Hz
- Audio Inputs RCA
- Marine Grade Protection Yes, ABYC and ASTM Certified
- Power Terminal 12V/GND Molex 10 Gauge
- Speaker Terminal Molex Plug Connector
- Fusing 1 x 30A
- Certifications Marine and Powersports
- Weight 2.09 lb
- Dimensions 3.70in x 5.51in x 1.77in