Skip to product information
1 of 5

HIFONICS

ZD-1350.1D

ZD-1350.1D

Class-D Mono Car Amplifier, 1350W Max, 1-Ohm Stable, Bass Remote And Onboard Crossover Included

Free Shipping

Regular price $159.99
Sale price $159.99 Regular price $199.99
Save 20%
Shipping calculated at checkout.
Features
    • 1350W max power with 1 x 1350W at 1 ohm for subwoofer duty
    • Variable 50Hz-250Hz low-pass crossover at 12dB per octave
    • 15Hz-40Hz subsonic filter keeps the sub from wasting excursion
    • Wired bass remote included for subwoofer level control at the dash
    • DC Signal Sense starts the amp without a remote turn-on wire
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • ZD-1350.1D Class-D Mono Amplifier
    • Wired Bass Remote Control

SKU: SKU: ZD-1350.1D

View full details

Product Description

The Hifonics ZD-1350.1D is a ZEUS DELTA mono block amplifier built for subwoofer duty. It delivers 1350W max power, rated at 1 x 1350W into 1 ohm, 1 x 675W into 2 ohms, and 1 x 350W into 4 ohms, so it stays stable across common wiring setups, from one dual 2-ohm sub wired down to 1 ohm to a pair of 4-ohm woofers.

A PWM MOSFET power supply with the dual coil Simpatico design holds voltage constant through the output stage, so output stays consistent during long bass passages instead of sagging. Class-D topology and an aluminum heat sink keep the chassis compact at 9.68 x 5.75 x 2.16 in, small enough to mount behind a seat or on the back of the sub box.

Tuning happens on the amplifier. A variable low-pass crossover sweeps 50Hz to 250Hz at 12dB per octave, a 15Hz to 40Hz subsonic filter keeps the sub from wasting excursion on frequencies it cannot reproduce, and bass boost adds 0 to 12dB. Input sensitivity adjusts from 0.2V to 6V, and speaker-level inputs allow a tie-in to a factory head unit. THD stays under 0.1%.

The included wired bass remote puts level control at the dash. DC Signal Sense starts the amplifier when it detects signal on the RCA inputs, so a remote turn-on wire is optional. Nickel-plated RCA jacks resist corrosion, angled molded terminals accept 4 AWG power and 12 AWG speaker wire, and end-panel LEDs flag overload and speaker shorts. External 80A fusing required.

Features

    • Power That Holds Under Load

      A PWM MOSFET supply with dual coil design keeps voltage steady, so 1350W of output stays consistent through long bass passages instead of sagging between notes.

    • Tune The Sub At The Amp

      A 50Hz-250Hz variable low-pass, a 15Hz-40Hz subsonic filter, and 0-12dB of bass boost let you match output to the box and the vehicle.

    • Level Control Within Reach

      The included wired bass remote mounts at the dash, so you adjust subwoofer level track by track or as road noise changes without pulling over.

    • Compact Class-D Chassis

      Class-D efficiency and an aluminum heat sink fit 1350W into a 9.68 in chassis that mounts behind a seat or on the back of a sub box.

    • Install Feedback At A Glance

      End-panel LEDs flag overload and speaker short conditions, and DC Signal Sense starts the amplifier on RCA input signal with no remote turn-on wire needed.

Technical Specifications

  • Product Type Class-D Mono Car Amplifier
  • Amp Class Class D
  • Total Channels 1
  • Max Power 1350W
  • Power @ 1 Ohm 1 x 1350W
  • Power @ 2 Ohms 1 x 675W
  • Power @ 4 Ohms 1 x 350W
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov