ZD-1350.4D [Used]
HIFONICS
ZD-1350.4D [Used]
ZD-1350.4D [Used]
Class-D 4-Channel Car Amplifier, 1350W Max, Bridgeable To 2 x 675W, Onboard High-Pass And Low-Pass Crossovers
Free Shipping
Features
- 1350W max power across four full-range channels
- 4 x 335W at 2 ohms or 2 x 675W bridged for flexible wiring
- Variable high-pass and low-pass crossovers from 50Hz to 250Hz
- 10Hz-22kHz response covers door speakers and midbass
- DC Signal Sense starts the amp without a remote turn-on wire
Couldn't load pickup availability
What's Included in the box
- ZD-1350.4D Class-D 4-Channel Amplifier
SKU: SKU: ZD-1350.4D U
View full details![ZD-1350.4D [Used]](http://audiosavings.com/cdn/shop/files/3022035.jpg?v=1784093071&width=1445)
![ZD-1350.4D [Used]](http://audiosavings.com/cdn/shop/files/3022036.jpg?v=1784093071&width=1445)
![ZD-1350.4D [Used]](http://audiosavings.com/cdn/shop/files/3022037.jpg?v=1784093071&width=1445)
![ZD-1350.4D [Used]](http://audiosavings.com/cdn/shop/files/3022038.jpg?v=1784093071&width=1445)
![ZD-1350.4D [Used]](http://audiosavings.com/cdn/shop/files/3022039.jpg?v=1784093071&width=1445)
Product Description
Response runs 10Hz to 22kHz with THD under 0.5%, and variable high-pass and low-pass crossovers each sweep 50Hz to 250Hz at 12dB per octave. That lets you high-pass door speakers so they stop trying to reproduce bass they cannot handle, then low-pass a bridged channel pair feeding a sub. Built-in bass control and 0.2V to 6V input sensitivity handle level matching with factory or aftermarket head units, and speaker-level inputs allow a tie-in without a separate adapter.
A PWM MOSFET power supply with the dual coil Simpatico design keeps voltage constant under load, and Class-D topology with an aluminum heat sink keeps the chassis at 11.65 x 5.75 x 2.16 in and 5.07 lb, so it fits under a seat or in a side panel.
Angled molded terminals take 4 AWG power and ground and 12 AWG speaker wire, keeping the wiring profile clean in tight mounting spots. Nickel-plated RCA inputs resist corrosion, end-panel LEDs report overload and speaker short conditions, and DC Signal Sense starts the amplifier on RCA signal so a remote turn-on wire is optional. External 60A fusing required.
Features
-
Four Channels, Several Layouts
Run front and rear speakers at 4 x 170W, step up to 4 x 335W at 2 ohms, or bridge to 2 x 675W for a subwoofer and a front stage.
-
Crossovers For Each Job
Variable high-pass and low-pass filters sweep 50Hz to 250Hz at 12dB per octave, so door speakers stay clean while bridged channels handle low frequencies.
-
Steady Voltage Under Load
A PWM MOSFET supply with dual coil design holds voltage constant, keeping output consistent when all four channels are working at volume.
-
Fits Where Space Is Tight
An 11.65 in Class-D chassis with an aluminum heat sink and angled terminals mounts under a seat or behind a side panel with a clean wire profile.
-
Straightforward Wiring
Speaker-level inputs tie into a factory head unit, and DC Signal Sense starts the amplifier on RCA signal with no remote turn-on wire required.
Technical Specifications
- Product Type Class-D 4-Channel Car Amplifier
- Amp Class Class D
- Total Channels 4
- Max Power 1350W
- Power @ 2 Ohms 4 x 335W
- Power @ 4 Ohms 4 x 170W
- Bridged @ 4 Ohms 2 x 675W
- Variable High Pass Crossover 50Hz-250Hz, 12dB Per Octave
- Variable Low Pass Crossover 50Hz-250Hz, 12dB Per Octave
- Tone Control Built-In Bass Control
- Input Voltage Range 0.2-6V
- Frequency Response 10Hz-22kHz
- Total Harmonic Distortion < 0.5%
- Speaker Level Inputs Yes
- Power / Ground Terminal 4 AWG
- Speaker Terminal 12 AWG
- Fusing External 60A
- Vehicle Fitment Universal
- Color Black
- Weight 5.07 lb
- Dimensions 11.65 x 5.75 x 2.16 in