ZD-1950.1D
HIFONICS
ZD-1950.1D
ZD-1950.1D
Class-D Mono Car Amplifier, 1950W Max, 1-Ohm Stable, Bass Remote And Subsonic Filter Included
Free Shipping
Features
- 1950W max power with 1 x 1950W at 1 ohm for high-output subs
- Variable 50Hz-250Hz low-pass crossover at 12dB per octave
- 15Hz-40Hz subsonic filter keeps the sub from wasting excursion
- Wired bass remote included for subwoofer level control at the dash
- DC Signal Sense starts the amp without a remote turn-on wire
Couldn't load pickup availability
What's Included in the box
- ZD-1950.1D Class-D Mono Amplifier
- Wired Bass Remote Control
SKU: SKU: ZD-1950.1D
View full details




Product Description
A PWM MOSFET power supply with the dual coil Simpatico design keeps voltage constant through the output stage, so the amp holds output during sustained low frequency content. Class-D topology and an aluminum heat sink hold the chassis to 12.44 x 5.75 x 2.16 in at 5.38 lb, which still fits behind a rear seat or alongside a sub enclosure.
Tuning is onboard: a variable low-pass crossover from 50Hz to 250Hz at 12dB per octave, a 15Hz to 40Hz subsonic filter, and 0 to 12dB bass boost. Input sensitivity adjusts from 0.2V to 6V, speaker-level inputs allow a factory head unit tie-in, and THD stays under 0.1%.
The included wired bass remote mounts at the dash for level control on the move. DC Signal Sense starts the amplifier when it sees signal on the RCA inputs, so a remote turn-on wire is optional. Nickel-plated RCA jacks resist corrosion, angled molded terminals take 4 AWG power and ground and 12 AWG speaker wire, and end-panel LEDs report overload and speaker short conditions. External 100A fusing required.
Features
-
Output For A Serious Sub
1 x 1950W at 1 ohm and 1 x 975W at 2 ohms give a single high-excursion woofer or a pair of subs room to work without running the amp flat out.
-
Voltage That Stays Put
A PWM MOSFET supply with dual coil design keeps voltage constant through the output devices, so long bass notes hold their level instead of falling off.
-
Shape The Low End
A variable 50Hz-250Hz low-pass, a 15Hz-40Hz subsonic filter, and 0-12dB bass boost match output to the enclosure and the cabin.
-
Dash Level Control
The included wired bass remote adjusts subwoofer output while driving, useful when a track hits harder than the last one or a passenger is on a call.
-
Built For A Clean Install
Angled molded terminals take 4 AWG power and 12 AWG speaker wire, and end-panel LEDs flag overload and speaker short conditions during setup.
Technical Specifications
- Product Type Class-D Mono Car Amplifier
- Amp Class Class D
- Total Channels 1
- Max Power 1950W
- Power @ 1 Ohm 1 x 1950W
- Power @ 2 Ohms 1 x 975W
- Power @ 4 Ohms 1 x 450W
- Variable Low Pass Crossover 50Hz-250Hz, 12dB Per Octave
- Bass Boost 0-12dB
- Subsonic Filter 15Hz-40Hz
- Input Voltage Range 0.2-6V
- Frequency Response 15Hz-250Hz
- Total Harmonic Distortion < 0.1%
- Speaker Level Inputs Yes
- Bass Remote Included
- Power / Ground Terminal 4 AWG
- Speaker Terminal 12 AWG
- Fusing External 100A
- Vehicle Fitment Universal
- Color Black
- Weight 5.38 lb
- Dimensions 12.44 x 5.75 x 2.16 in