ZD-2550.1D
HIFONICS
ZD-2550.1D
ZD-2550.1D
Class-D Mono Car Amplifier, 2550W Max, 1-Ohm Stable, Bass Remote And Subsonic Filter Included
Free Shipping
Features
- 2550W max power with 1 x 2550W at 1 ohm for multi-sub systems
- 1 x 1275W at 2 ohms for a single high-excursion woofer
- Variable 50Hz-250Hz low-pass and 15Hz-40Hz subsonic filter
- Wired bass remote included for level control at the dash
- Aluminum heat sink in a 13.62 in chassis for tight trunk mounting
Couldn't load pickup availability
What's Included in the box
- ZD-2550.1D Class-D Mono Amplifier
- Wired Bass Remote Control
SKU: SKU: ZD-2550.1D
View full details




Product Description
A PWM MOSFET power supply with the dual coil Simpatico design keeps voltage constant across the output devices, so output holds through sustained low frequency passages rather than dropping when the box loads up. Class-D topology with an aluminum heat sink keeps the chassis at 13.62 x 5.75 x 2.16 in and 6.04 lb, so a high-output amplifier still mounts on the front of an enclosure or against a trunk wall.
Tuning is handled on the amplifier: a variable low-pass crossover from 50Hz to 250Hz at 12dB per octave, a 15Hz to 40Hz subsonic filter, and 0 to 12dB bass boost. Input sensitivity spans 0.2V to 6V, speaker-level inputs allow a factory head unit tie-in, and THD stays under 0.1%.
The included wired bass remote gives dash-side level control. DC Signal Sense starts the amplifier from RCA input signal, making the remote turn-on wire optional. Nickel-plated RCA jacks resist corrosion, angled molded terminals accept 4 AWG power and ground and 12 AWG speaker wire, and end-panel LEDs flag overload and speaker shorts. External 125A fusing and adequate charging system support are required at this power level.
Features
-
Headroom For Multiple Subs
2550W at 1 ohm and 1275W at 2 ohms feed a pair of high-excursion woofers, so the system plays loud without the amplifier working at its limit.
-
Stable Power Delivery
A PWM MOSFET supply with dual coil design keeps voltage constant, holding output through sustained low frequency passages where lesser supplies fall off.
-
Tune It To The Box
A variable 50Hz-250Hz low-pass, a 15Hz-40Hz subsonic filter, and 0-12dB bass boost match the amplifier to a sealed or ported enclosure.
-
Level Control On The Move
The included wired bass remote mounts at the dash so you can pull sub output back for conversation and bring it up again in a second.
-
Compact For The Power
Class-D topology and an aluminum heat sink fit 2550W into a 13.62 in chassis that mounts on an enclosure face or against a trunk wall.
Technical Specifications
- Product Type Class-D Mono Car Amplifier
- Amp Class Class D
- Total Channels 1
- Max Power 2550W
- Power @ 1 Ohm 1 x 2550W
- Power @ 2 Ohms 1 x 1275W
- Power @ 4 Ohms 1 x 650W
- Variable Low Pass Crossover 50Hz-250Hz, 12dB Per Octave
- Bass Boost 0-12dB
- Subsonic Filter 15Hz-40Hz
- Input Voltage Range 0.2-6V
- Frequency Response 15Hz-250Hz
- Total Harmonic Distortion < 0.1%
- Speaker Level Inputs Yes
- Bass Remote Included
- Power / Ground Terminal 4 AWG
- Speaker Terminal 12 AWG
- Fusing External 125A
- Vehicle Fitment Universal
- Color Black
- Weight 6.04 lb
- Dimensions 13.62 x 5.75 x 2.16 in