2) JBL Control 24CT 4" 70v Commercial Restaurant/Bar/Cafe White Ceiling Speakers
2) JBL Control 24CT 4" 70v Commercial Restaurant/Bar/Cafe White Ceiling Speakers
JBL
2) JBL Control 24CT 4" 70v Commercial Restaurant/Bar/Cafe White Ceiling Speakers
2) JBL Control 24CT 4" 70v Commercial Restaurant/Bar/Cafe White Ceiling Speakers
4" 70V In-Ceiling Speaker Pair, 30W Taps, 130 Degree Coverage, Tile Rails And Backing Plate Included
Free Shipping
Features
- 4 in polypropylene-coated woofer with coaxial 0.75 in titanium tweeter
- 130 degree conical coverage means fewer speakers per floor area
- 70V taps at 30 W, 15 W, 7.5 W and 3.7 W plus 16 ohm operation
- Ported enclosure and SonicGuard overload protection
- Tile support rails fit 2 x 4 ft and 600 x 1200 mm ceiling tiles
Couldn't load pickup availability
What's Included in the box
- Two Control 24CT ceiling speakers
- Two C-shaped support backing plates
- Four tile support rails for 2 x 4 ft or 600 x 1200 mm tiles
- Two cutout templates
- Two paint shields
- Two removable locking wiring connectors
SKU: SKU: Control 24CT
View full details







Product Description
A 100 mm (4 in) woofer with a polypropylene-coated cone and pure butyl rubber surround handles the low end and holds up in humid rooms. An aluminum voice coil former pulls heat away for better long-term power handling. The coaxially mounted 19 mm (0.75 in) titanium-coated tweeter is diffraction-loaded, which is how the speaker gets its 130 degree conical pattern. That wide angle covers more floor per speaker, so the layout uses fewer units and less labor.
Frequency range runs 80 Hz to 20 kHz with 80 W continuous program and 40 W continuous pink noise handling, reaching 102 dB SPL at one meter. The computer-optimized ported enclosure gives warm bass for a 4 in driver, and JBL's SonicGuard overload protection works without being audible to listeners.
Wiring is up to you. The multi-tap transformer offers 70V taps at 30 W, 15 W, 7.5 W, and 3.7 W (100V: 30 W, 15 W, 7.5 W). The 16 ohm nominal impedance also lets you parallel multiple speakers on a low-impedance amplifier instead of building a constant-voltage system.
Installation hardware is complete: a C-shaped backing plate, tile support rails that fit 2 x 4 ft or 600 x 1200 mm tiles, a cutout template, a paint shield, and a removable locking connector accepting up to 12 AWG. Cutout is 6.6 in, overall size 7.9 x 7.7 in, and each speaker weighs 6 lb. The unit is listed for air handling spaces per UL1480 and UL2043.
Features
Wide Pattern Cuts The Speaker Count
A diffraction-loaded tweeter produces 130 degree conical coverage, so each speaker covers more floor and the install needs fewer units and less wire.
Higher Fidelity From The Ceiling
An 80 Hz to 20 kHz range with low distortion suits offices, airports, and restaurants where background music should sound like music.
Warm Bass From A 4 In Driver
A computer-optimized ported enclosure and a polypropylene-coated cone give this compact speaker warm low-end body that most sealed ceiling cans simply cannot produce.
Silent Overload Protection
SonicGuard limits the speaker during overload without audible artifacts, so the system stays reliable through long operating days at high playback levels.
Everything Needed To Mount It
Backing plates, tile rails for 2 x 4 ft tiles, cutout templates, paint shields, and locking connectors ship in the box for a same-day install.
Technical Specifications
- Product Type 4 in 70V In-Ceiling Speaker (Pair)
- Frequency Range 80 Hz - 20 kHz
- Power Capacity 80 W continuous program, 40 W continuous pink noise
- Transformer Taps 70V: 30 W, 15 W, 7.5 W, 3.7 W / 100V: 30 W, 15 W, 7.5 W
- Nominal Coverage Angle 130 degrees conical
- Directivity Factor (Q) 2.4 dB averaged 500 Hz to 4 kHz
- Directivity Index (DI) 3.8 dB averaged 500 Hz to 4 kHz
- Rated Maximum SPL 102 dB at 1 m
- Nominal Impedance 16 ohms
- Drivers 4 in polypropylene-coated cone woofer, 0.75 in titanium-coated tweeter
- Enclosure Formed steel backcan, medium impact polystyrene baffle, UL94V-0 rated
- Termination Removable locking connector with screw-down terminals, max 12 AWG
- Safety Agency UL1480, UL2043, NFPA90 and NFPA70 for air handling spaces
- Cutout Size 6.6 in
- Weight 6 lb each
- Dimensions 7.9 in H x 7.7 in diameter