Skip to product information
1 of 19
Bundle & Save

JBL

CSMA280 2 x 80W Amplifier + (Qty 16) Drop Ceiling Tile Speaker Package

CSMA280 2 x 80W Amplifier + (Qty 16) Drop Ceiling Tile Speaker Package

Commercial Amplifier, 80W, With 16 8" Drop Ceiling Tile Speakers, No Cutting Required
Regular price $2,662.19
Sale price $2,662.19 Regular price $4,584.76
Save 41%
Shipping calculated at checkout.
Features
    • JBL CSMA280 commercial amplifier with 8 mixer-channel inputs
    • 16 Rockville DCS8T speakers drop into a 2x2 ceiling grid tile
    • No cutting or backcan needed, just lift the tile and install
    • Selectable 10W, 5W, 2.5W, or 8 ohm direct tap per speaker
    • Sleep mode powers the amp down after 30 minutes of silence
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • 1 x JBL CSMA280 Commercial Mixer/Amplifier
    • 16 x Rockville DCS8T Drop Ceiling Tile Speakers

SKU: SKU: CSMA280+(16) DCS8T

View full details

Product Description

This package pairs the JBL CSMA280 commercial mixer/amplifier with 16 Rockville DCS8T drop ceiling tile speakers, a fast option for a larger restaurant or an office with multiple rooms with a standard 2 foot by 2 foot suspended grid ceiling. Instead of cutting a hole and mounting a backcan, each DCS8T swaps in for a ceiling tile: lift the tile, drop the speaker into its place, and run the wire. The CSMA280 runs eight mixer-channel inputs into two output channels at up to 80W, drives 4 ohm or 8 ohm loads directly, and steps up to 70V or 100V distributed lines through its built-in Hi-Z switch.

Each DCS8T is tuned for both speech and music, with 91 dB sensitivity, a 105-degree dispersion pattern, and a rear-panel knob that selects 10W, 5W, 2.5W, or 8 ohm direct so volume can be set per tile. A low 3.9" mounting depth keeps the speaker clear of ductwork and other obstructions above the grid, and spring-loaded terminals speed up the wiring on an install with this many units. Independent bass, treble, and an automatic sleep mode on the amplifier round out a system built to go in fast and run without much attention afterward.

Features

    • Eight-Channel Commercial Mixing

      Eight mixer-channel inputs with euroblock mic/line and RCA connections let you combine paging, music, and announcement sources on one amplifier.

    • Drop-In Tile Installation

      Each DCS8T replaces a standard 2x2 ceiling tile directly, cutting install time versus a cut-in speaker that needs a backcan.

    • Low-Profile Fit

      A slim 3.9 inch mounting depth keeps the speaker clear of ductwork, sprinkler lines, and other obstructions above the ceiling grid.

    • Per-Tile Volume Control

      A rear-panel tap selects 10W, 5W, 2.5W, or 8 ohm direct, so each tile can be set to match its room.

    • Low-Maintenance Operation

      Automatic sleep mode after 30 minutes of silence and voice-activated ducking for paging keep the system running without daily attention from staff.

Technical Specifications

  • Product Type Commercial Amplifier and Drop Ceiling Tile Speaker Package
  • Amplifier Model JBL CSMA280
  • Amplifier Power 80W total, 10W continuous per channel
  • Amplifier Inputs/Outputs 8 inputs, 2 outputs
  • Amplifier Load Support 4 ohm, 8 ohm, 70V, 100V
  • Speaker Model Rockville DCS8T (qty 16)
  • Speaker Sensitivity 91 dB
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov