JBL CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V, 8 inputs
JBL CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V, 8 inputs
JBL
JBL CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V, 8 inputs
JBL CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V, 8 inputs
Commercial Mixer-Amplifier, 8 Inputs, 2 x 80 W, 4/8-Ohm and 70V/100V, 1U, With Rack Mounting Kit
Free Shipping
Features
- Eight mixer inputs and two 80 W amplified outputs in one chassis
- Hi-Z switch adds direct 70V and 100V speaker lines from the same outputs
- Voice-activated ducking on channels 1 and 5 lowers music when someone speaks
- Priority muting silences all other channels through a simple switch closure
- Two auxiliary outputs send the input mix to additional amplifiers
Couldn't load pickup availability
What's Included in the box
- (1) CSMA 280 Mixer-Amplifier
- (1) Rack Mounting Kit
SKU: SKU: CSMA280 U
View full details






Product Description
Features
Two Zones From One Box
Two 80 W outputs run separate areas at independent levels, so a dining room and a patio each get the volume they need from a single unit.
Switch To Distributed Audio
The Hi-Z switch brings the internal transformer into circuit for 70V or 100V lines, while 4 and 8 ohm operation covers short local speaker runs.
Announcements Cut Through
Voice-activated ducking on channels 1 and 5 lowers the music as soon as someone speaks, with a rear trim pot to set trigger sensitivity.
Never Miss A Page
A priority switch closure mutes other channels and wakes the amplifier from sleep mode, so an announcement goes out even after a quiet period.
Expandable Output
Two auxiliary outputs carry the input mix to additional amplifiers, letting you add a third zone later without replacing the mixer-amplifier.
Technical Specifications
- Product Type Commercial Mixer-Amplifier
- Maximum Output Power 80 W per channel into 4 or 8 ohms, 1 kHz, 0.5% THD
- Continuous Power 10 W per channel
- Inputs 8
- Output Channels 2
- Distributed Audio 70V and 100V via Hi-Z switch
- Insertion Loss 1 dB maximum for 70V and 100V outputs
- Input Sensitivity Mic 3 mVrms, Line 775 mVrms, RCA 300 mVrms
- Frequency Response 20 Hz - 20 kHz +/-2 dB (4/8 ohms), 80 Hz - 15 kHz +/-2 dB (70V/100V)
- Signal to Noise Ratio Greater than 90 dB
- Crosstalk -70 dB @ 1 kHz
- Phantom Power 27 VDC
- AC Input 100 - 240 VAC, 50/60 Hz
- Operating Temperature 32 to 95 F (0 to 35 C)
- Weight 11.9 lb
- Dimensions 17.2 x 11.9 x 1.7 in (W x D x H)