VRX932LAP Powered Active 12" 1750W 2-Way Line Array Speaker With DSP

The VRX932LAP is a powered 12-inch two-way line array speaker built for setups that need line array coverage without carrying separate power amplifiers. A built-in JBL Drivepack DPC-2 amplifier module, designed by Crown, delivers up to 1750W of peak power, and a DSP-based input module handles system optimization and EQ before the signal reaches the drivers, so the speaker arrives tuned rather than needing external processing.

Three JBL 2408J compression drivers sit on the same Constant Curvature waveguide used across the VRX932 line, letting arrays of up to five units work together as one continuous HF source, while a Differential Drive 12-inch woofer handles low end. Integral rigging hardware connects enclosures for a flown array, and a dual angle pole socket adds the option to mount a single unit on a pole or tripod for smaller setups. An input attenuator gives 0 to 16 dB of adjustment at the speaker itself.

At 52 lb and 13.75 by 23.5 by 17.5 inches, the VRX932LAP suits mobile and touring rigs where fast setup matters: run a line-level signal to each enclosure and skip the external amp rack, power distribution, and speaker cable runs a passive array would need.