Kicker 12KMTAP Pipe Diameter Adapter Pack for KMTES and KMTED Tower Enclosures

The 12KMTAP widens the range of tower pipe diameters a Kicker KMTES or KMTED enclosure can clamp onto. Those enclosures ship with clamps and adapters sized for the most common wakeboard tower tubing, but towers, roll bars, and roof supports were never standardized. If your pipe falls outside the included range, the clamp either will not close or will not hold once the boat is moving.

This pack covers four additional diameters: 1-5/8 in, 1-3/4 in, 1-7/8 in, and 2 in. Each size ships as a pair, so both enclosures in a set can be mounted on matching left and right tubes without ordering twice. The adapters drop into the existing clamp, so installation stays at hand-tool level with no drilling, welding, or bracket fabrication.

The use case runs well past boats. Side-by-side roll cages, Jeep sport bars, golf cart roof supports, and shop-built speaker stands all use tubing in this range. Sizing the clamp correctly also protects the finish on the pipe and keeps the enclosure from rotating out of aim under vibration.

Order it alongside a set of KMTES or KMTED enclosures when you already know the tube diameter falls between 1-5/8 in and 2 in.