Kicker L7S102 10" 1200 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S10-2

The Kicker 44L7S10-2 is a 10-inch Solo-Baric L7S subwoofer built around a square cone. Square matters here: the cutting-edge square design means more cone area, more air displacement, and more volume than a round woofer of the same nominal size. The injection-molded polypropylene SoloKon cone carries 360-degree constant-contact back bracing that follows every contour of the square shape, with patented corner ribs that keep the corners from flexing and turning into distortion. A ribbed Santoprene surround with blue stitching handles long excursion, and the UniPlate back plate and pole piece with perimeter venting move heat away from the motor during long, loud sessions. A cast aluminum basket, large ceramic magnet, and thick tinsel leads round out the build, and satin-nickel plated spring-loaded terminals accept heavy wire. Dual two-ohm coils wire down to one ohm in parallel for maximum output from a stable mono amplifier, or up to four ohms in series when the amplifier prefers a higher load. It handles 1200W peak and 600W RMS and works in a sealed or ported enclosure: sealed from 0.66 to 1.0 cubic feet for tight, accurate bass, or ported from 1.25 to 2.25 cubic feet for more output down low. Recommended power is 600W. A 10-inch sub balances output against box size, which makes it a practical choice for sedan trunks, hatchbacks, and extended-cab trucks.