Home / Kicker /

KICKER 47KMWPY820 20 ft. 8 AWG Marine Power Wire in Yellow KMWPY820

Product Description Specifications

KICKER 47KMWPY820 20 ft. 8 AWG Marine Power Wire in Yellow KMWPY820

  • KICKER 47KMWPY820 20 ft. 8 AWG Marine Power Wire in Yellow KMWPY820
  • KICKER 47KMWPY820 20 ft. 8 AWG Marine Power Wire in Yellow KMWPY820
1 2

Kicker

KICKER 47KMWPY820 20 ft. 8 AWG Marine Power Wire in Yellow KMWPY820

KICKER 47KMWPY820 20 ft. 8 AWG Marine Power Wire in Yellow KMWPY820

Marine Power Wire, 8 AWG Tinned OFC, 20 Ft. In Yellow, ABYC And Coast Guard Compliant
$28.90
$28.90 $39.99
Save 27%
Shipping calculated at checkout.
Features
    • 20 ft of 8 AWG marine power wire in yellow
    • Pure full-spec OFC copper carries the current the gauge promises
    • Tinned conductor resists corrosion in salt air and damp compartments
    • Flexible jacketing routes around corners and bulkheads with ease
    • Compliant with Coast Guard and ABYC marine standards
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • One 20 ft run of 8 AWG marine power wire in yellow

SKU: 47KMWPY820

View full details

Product Description

The KICKER KMWPY820 is a 20-foot run of 8 AWG marine power wire in yellow, built for amplifier installs where the cable has to survive salt air as well as carry current.

KICKER starts with pure, full-spec OFC copper and tins it to prevent corrosion. Full-spec matters: a cable labeled 8 AWG that is actually thinner starves an amplifier and heats up under load. Tinning matters just as much on the water, because untinned copper wicks moisture at the terminations and loses conductivity strand by strand.

The jacket is soft and flexible, so the cable routes around bulkheads, through rigging tubes and into tight battery compartments without a fight. Yellow cable is typically used for ground legs and negative runs.

It is compliant with Coast Guard and ABYC standards, so it is appropriate for new boat construction as well as retrofit work. Pair it with a KMFMF fuse holder at the battery and a KMFDB3 fused distribution block to keep the entire power path to one marine standard.

Features

    • Full-Spec Copper

      KICKER uses pure, full-spec OFC copper, so a cable sold as 8 AWG actually measures 8 AWG and feeds your amplifier the current it was rated for.

    • Tinned Against Corrosion

      The conductor is tinned to stop the moisture wicking that eats untinned copper at the terminations, which is where marine power runs usually fail first.

    • Bends Where You Need It

      Soft, flexible jacketing lets the cable turn around bulkheads and drop into tight battery compartments without kinking or fighting the installer.

    • Meets Marine Standards

      Compliance with Coast Guard and ABYC requirements makes this wire appropriate for new boat construction as well as aftermarket retrofit installs.

    • Part Of A Complete Path

      Run it with a KMFMF battery fuse holder and a KMFDB3 fused distribution block and the whole power system stays at one marine standard.

Technical Specifications

  • Product Type Marine Power Wire
  • Gauge 8 AWG
  • Length 20 ft
  • Color Yellow
  • Conductor Pure full-spec OFC copper, tinned
  • Jacket Flexible
  • Standards Coast Guard and ABYC compliant
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov