Skip to product information
1 of 10

Kicker

48CWR124

48CWR124

12" Dual Voice Coil Car Subwoofer, 4-Ohm, 500W RMS, 1000W Peak, Sealed Or Ported

Free Shipping

Regular price $170.96
Sale price $170.96 Regular price $189.99
Save 10%
Shipping calculated at checkout.
Features
    • Dual 4-ohm voice coils give you wiring options for your amplifier
    • Handles 500W RMS and 1000W peak for deep, sustained low end
    • Forced Air Cooling runs the motor about 25 percent cooler
    • Fits sealed boxes from 1.0 to 2.0 cu ft or ported for more output
    • 5-3/4 in mounting depth with a 11 in cutout
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • One CompR 12-inch subwoofer (CWR12-4)

SKU: SKU: 48CWR124

View full details

Product Description

The KICKER CompR 12-inch subwoofer is built to produce deep, controlled bass in a car, truck, or SUV system. Its dual 4-ohm voice coils give you wiring options, so you can match the sub to your amplifier and use the full 500W RMS it is rated to handle. Peak power handling reaches 1000W, and sensitivity of 86.9 dB at 1W/1m turns amplifier power into output you feel through the seat.

SoloKon technology joins the cone to a vented back brace, creating one integrated unit that cools the motor and keeps distortion down at high volume. An advanced suspension and heat management system keeps the bass deep and consistent as output climbs. Forced Air Cooling moves air through the motor structure so the sub runs about 25 percent cooler than the previous generation, which holds output steady through long listening sessions. The blacked-out cone keeps the look clean in an open trunk install.

The CompR 12 works in a sealed or ported enclosure. A sealed box between 1.0 and 2.0 cu ft keeps bass tight and accurate, which suits rock, country, and acoustic material. A ported box between 1.75 and 2.25 cu ft trades some of that control for extra output on hip-hop and electronic tracks. Mounting depth is 5-3/4 in with a 11 in cutout, so it fits behind a rear seat or under a truck bench in most vehicles.

Match it with an amplifier rated near 500W RMS at the impedance your wiring produces, and you have a bass system that plays loud, stays clean, and holds up to daily use.

Features

    • Deep, Controlled Low End

      The 12-inch polypropylene cone moves enough air for low, sustained bass, while the suspension keeps cone motion in check when the volume climbs.

    • Wiring Options for Your Amp

      Dual 4-ohm voice coils let you wire in series or parallel, so you can match your amplifier's rated impedance and pull its full output.

    • Cooler Running, Longer Sessions

      Forced Air Cooling pushes air through the motor structure and runs the sub about 25 percent cooler, which keeps output steady on long listening sessions.

    • Sealed or Ported, Your Call

      Use a 1.0 to 2.0 cu ft sealed box for tight, accurate bass, or a 1.75 to 2.25 cu ft ported box when you want more output.

    • Built to Take Daily Use

      SoloKon technology joins the cone to a vented back brace, forming one unit that cools the motor and holds distortion down when you push the sub hard.

Technical Specifications

  • Product Type Car Subwoofer
  • Woofer Size 12 in (30 cm)
  • Impedance 4 Ohm DVC
  • Recommended Amplifier Power 500 W RMS
  • Peak Power 1000 W
  • Sensitivity 86.9 dB (1W/1m)
  • Sealed Enclosure Volume 1.0 - 2.0 cu ft
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov