Kicker 50CWCS84 CompC 8" Subwoofer SVC 4 ohm Car Audio Sub CWCS84
Kicker
Kicker 50CWCS84 CompC 8" Subwoofer SVC 4 ohm Car Audio Sub CWCS84
Kicker 50CWCS84 CompC 8" Subwoofer SVC 4 ohm Car Audio Sub CWCS84
8" Car Subwoofer, 4-Ohm SVC, 400W Peak, 200W RMS, Polypropylene Cone, Stamped Steel Basket
Free Shipping
Features
- Single 4-ohm voice coil wires straight to one mono amplifier
- 100-200 W RMS recommended power with 400 W peak handling
- Injection-molded polypropylene cone with ribbed polyurethane surround
- Forced-Air Cooling keeps voice coil temperature down on long sessions
- Spring-loaded terminals accept bare speaker wire, no soldering
Couldn't load pickup availability
What's Included in the box
- Kicker 50CWCS84 CompC 8" Subwoofer
SKU: SKU: 50CWCS84
View full details





Product Description
The cone is injection-molded polypropylene paired with a ribbed polyurethane surround, a combination built to hold its shape through repeated excursion. Forced-Air Cooling moves air across the high-temp voice coil during long listening sessions, and Spiralead tinsel leads keep the electrical connection intact as the cone travels. A stamped steel basket and the signature yellow surround stitching round out the build.
Frequency response covers 30 to 500 Hz with 83.3 dB sensitivity and a 42.2 Hz free-air resonance. Sealed boxes between 0.5 and 1.2 cu ft give you tighter, more controlled bass for daily driving, while vented boxes between 0.66 and 1.2 cu ft trade some of that control for more output on the lowest notes. Either way the footprint stays manageable: mounting depth is 4-3/16 inches, cutout diameter is 6-15/16 inches, and the outer frame measures 8-9/16 inches.
That makes the CompC 8 a practical fit for compact cars, truck under-seat boxes, and behind-seat enclosures where a 10 or 12-inch sub will not physically fit. Covered by a 1-year warranty.
Features
-
Big Output From A Small Box
A sealed enclosure as small as 0.5 cu ft is enough to run this 8-inch sub, so you add real low end and still keep usable cargo space.
-
Wiring Made Simple
The single 4-ohm voice coil and spring-loaded terminals connect to a mono amplifier in minutes, with no soldering and no series-parallel math to work through.
-
Built To Take The Heat
Forced-Air Cooling pushes air across the high-temp voice coil, so output stays consistent through long drives and repeated high-power playback in warm weather.
-
Cone That Holds Its Shape
An injection-molded polypropylene cone and ribbed polyurethane surround resist flex at full excursion, keeping bass clean across the 30 to 500 Hz response range.
-
Sealed Or Ported, Your Call
Recommended volumes span 0.5-1.2 cu ft sealed and 0.66-1.2 cu ft vented, letting you tune for tight accuracy or for more low-frequency output.
Technical Specifications
- Product Type 8" Single Voice Coil Car Subwoofer
- Woofer Size 8 in, 20 cm
- Rated Impedance 4 Ohms SVC
- Recommended Amplifier Power 100-200 W RMS
- Peak Power Handling 400 W (ANSI/CTA-2031-A)
- Sensitivity 83.3 dB (1W/1m)
- Frequency Response 30-500 Hz
- Fs 42.2 Hz
- Sealed Enclosure Volume 0.5-1.2 cu ft, 14.2-34 L
- Vented Enclosure Volume 0.66-1.2 cu ft, 18.7-34 L
- Mounting Cutout 6-15/16 in, 17.7 cm
- Warranty 1 Year
- Mounting Depth 4-3/16 in, 10.5 cm
- Outer Frame Dimension 8-9/16 in, 21.7 cm