50DCWC102

Two CompC 10-inch subwoofers in one factory-tuned vented box, with no box building required. The CompC Dual 10-Inch Loaded Enclosure comes wired to a single 2-ohm terminal, so you run one mono amplifier and the system is live. Recommended power is 600 W RMS, peak handling is 1,200 W per ANSI/CTA-2031-A, and sensitivity measures 98.4 dB.

The port is tuned to 35 Hz, which puts the output right where hip-hop, EDM, and modern country mixes place their low end. Heavy MDF panels keep cabinet flex out of the signal, and the wedge profile (13-1/2 inches deep at the top, 16-1/4 inches at the bottom) sits flat against a trunk wall or the back of an SUV cargo floor.

Thick black carpet protects the cabinet from scuffs during loading, and the embroidered KICKER logo gives the install a finished look without extra fabrication. Spring-loaded speaker terminals accept bare wire, so hookup takes minutes rather than an afternoon.

At 28 inches wide and 14 inches tall, the box fits most full-size trunks, hatchbacks with folding rear seats, and SUV cargo areas. The 2-ohm load pairs directly with a CXA800.1 or any mono amplifier rated near 600 W RMS at 2 ohms. Choose this one when you want two 10s of output on install day instead of sourcing subs, a box, and terminals separately.