Skip to product information
1 of 11

Kicker

Pair KICKER 51MSS65 6.5" 200 Watt Premium Marine Component Speakers 4-Ohm MSS65

Pair KICKER 51MSS65 6.5" 200 Watt Premium Marine Component Speakers 4-Ohm MSS65

6.5" Marine Component Speakers, 100W RMS Each, 4-Ohm Pair, RGBW LED Lighting, White And Charcoal Grilles

Free Shipping

Regular price $599.99
Sale price $599.99 Regular price $649.99
Save 7%
Shipping calculated at checkout.
Features
    • 6-1/2-inch 4-Ohm marine component system rated 15-100W RMS, 200W peak
    • Separate tweeters mount at ear level for a higher soundstage
    • Carbon-fiber-infused woofers with internal 12dB/octave crossovers
    • Real Marine build resists salt spray, washdowns, and UV exposure
    • Built-in RGBW LED lighting with white and charcoal grilles included
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • (2) MSS65 6-1/2" Marine Woofers
    • (2) 28mm Tetoron Tweeters
    • (2) Charcoal Grilles
    • (2) White Grilles

SKU: SKU: 51MSS65

View full details

Product Description

The MSS65 is a 6-1/2-inch marine component system: separate woofers and 28mm Tetoron dome tweeters, so you can place the high frequencies where they actually reach your ears instead of down at knee level. That single change lifts the soundstage in a boat cockpit, where seating rarely lines up with factory speaker locations. Carbon-fiber-infused woofers keep the midrange accurate, and internal 12dB/octave Butterworth crossovers protect the tweeters while keeping the handoff clean.

Rated impedance is 4 Ohms, recommended power is 15 to 100W RMS per channel, and peak handling is 200W. Sensitivity of 89dB and 55Hz-25kHz response make the system a solid full-range front stage on its own, and an easy match with a marine subwoofer later.

Everything is built for exposure. KICKER Real Marine design covers marine-compliant terminals, splash-and-spray resistance, and UV-resistant materials, and glass-added nylon woofer baskets handle heat and abuse better than stamped steel. Woofers mount in a 5-7/16-inch hole with 3-1/4 inches of depth; flush-mount tweeters need a 2-inch hole with 2-1/8 inches of depth, so plan tweeter locations on the dash, A-pillar, or upper cabin panel before cutting.

RGBW LED lighting is built in for night use, and both white and charcoal grilles are included so the install matches the interior. This system suits center-console dashes, pontoon helms, wake boat cockpits, and any build where speaker placement, not power, is the limiting factor.

Features

    • Put The Highs At Ear Level

      Separate tweeters mount on a dash, pillar, or upper panel, lifting the soundstage above the gunwale instead of firing detail into the back of your legs.

    • Accurate Midrange On The Water

      Carbon-fiber-infused woofers stay stiff under load, so vocals and guitars keep their shape at the volume open-air listening demands.

    • Clean Handoff, Protected Tweeters

      Internal 12dB/octave Butterworth crossovers split the signal at 3.2kHz, keeping low frequencies out of the tweeters and the transition between them unforced.

    • Built For Salt And Sun

      Real Marine construction adds marine-compliant terminals, splash-and-spray resistance, and UV-resistant materials, so the system survives seasons of exposure instead of fading and corroding.

    • Finish It Your Way

      Integrated RGBW LED lighting plus both white and charcoal grilles let the install match a light or dark cockpit and glow after sunset.

Technical Specifications

  • Product Type 6-1/2" Marine Component Speaker System (Pair)
  • Woofer 6-1/2" (165 mm)
  • Tweeter 1-1/8" (28 mm)
  • Tweeter Dome Material Tetoron
  • Rated Impedance 4 Ohms
  • Recommended Amplifier Power 15-100W RMS
  • Peak Power Handling 200W
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov