CR3.5BT Monitor Pair with RCM03 Condenser Mic
MACKIE
CR3.5BT Monitor Pair with RCM03 Condenser Mic
CR3.5BT Monitor Pair with RCM03 Condenser Mic
3.5-Inch Powered Monitors, Bluetooth, Shockmount, Windscreen, Two 10-Foot Cables
Free Shipping
Features
- 3.5-inch woofer and silk-dome tweeter for studio playback
- Tone control shifts from transparent response to added bass and sparkle
- Desktop and bookshelf modes support different listening distances
- Bluetooth, TRS, RCA and 3.5 mm inputs support varied sources
- Cardioid microphone, two 10-foot cables, shock mount and foam cap included
Couldn't load pickup availability
What's Included in the box
- (1) CR3.5BT powered studio monitors
- (1) RCM03 cardioid condenser microphone
- (1) 10 ft 3.5 mm jack-to-XLR cable
- (1) 10 ft XLR-to-XLR cable
- (1) Metal shock mount
- (1) Metal anti-wind foam cap
SKU: SKU: CR3.5BT+RCM03
View full details














Product Description
The cardioid RCM03 microphone uses a 16 mm diaphragm to record vocals, instruments and spoken audio, with reduced pickup from the sides and rear. Connect it to an audio interface or mixer with 48V DC phantom power, or use the included 10-foot 3.5 mm-to-XLR cable for a computer sound card connection. The box also includes a 10-foot XLR-to-XLR cable, metal shock mount and metal anti-wind foam cap. Together, these components cover playback, recording and monitoring in one studio bundle.
Features
Adjustable Playback Tone
The sound-shaping control starts with a transparent response, then adds bass and high-frequency sparkle for music production, gaming or casual listening.
Flexible Listening Placement
Switch between desktop and bookshelf modes to position the monitors for close listening at a desk or playback from across the room.
Wired and Wireless Sources
TRS, RCA and 3.5 mm inputs connect interfaces, mixers and playback devices, while Bluetooth pairs with phones and laptops for wireless listening.
Focused Microphone Pickup
A cardioid pattern and 16 mm diaphragm focus on vocals, instruments and speech, with reduced pickup from the sides and rear.
Recording Accessories Included
The 10-foot 3.5 mm-to-XLR and XLR-to-XLR cables, metal shock mount and foam cap support microphone connection and setup in home studios.
Technical Specifications
- Product Type Powered studio monitors and condenser microphone bundle
- Speaker Drivers 3.5-inch woven woofer; silk-dome tweeter with protective grille
- Speaker Tone Control Sound-shaping tone control
- Speaker Location Modes Desktop and bookshelf
- Speaker Inputs TRS, RCA, 3.5 mm
- Speaker Wireless Connectivity Bluetooth
- Speaker Output Built-in headphone output
- Microphone Polar Pattern Unidirectional cardioid
- Microphone Capsule Permanently polarized single-sided electret
- Microphone Diaphragm 16 mm
- Microphone Power Requirement 48V DC phantom power
- Microphone Sensitivity -29 dB ± 2 dB (0 dB = 1 V/Pa at 1 kHz)
- Microphone Output Impedance 200 Ω ± 30% at 1 kHz
- Microphone S/N Ratio 74 dB
- Microphone Frequency Response 30 Hz to 20 kHz
- Microphone Fixed Crossover Filter Cutoff Frequency 40 Hz to 16 kHz
- Microphone Load Impedance ≥ 1000 ohms
- Microphone Equivalent Noise Level ≤ 18 dBA (IEC 581-5)
- Microphone Maximum Input SPL 126 dB (THD = 1.0% at 1 kHz)
- Microphone Material Steel basket + aluminum body
- PCB Layout Surface mount
- Weight Monitors: 8.1 lb (3.7 kg); microphone: 0.84 lb (380 g)
- Dimensions Monitors: 8.1 × 5.5 × 7.1 in / 206 × 140 × 180 mm; microphone: 51 mm maximum diameter × 215 mm length (8.46 in)