MP-360 In-Ear Monitors with X1 A Microphone
MACKIE
MP-360 In-Ear Monitors with X1 A Microphone
MP-360 In-Ear Monitors with X1 A Microphone
Triple Balanced Armature Drivers, Cardioid X1 A Condenser, Hard Case And Mic Clip
Free Shipping
Features
- Triple balanced armature drivers deliver vocal detail and ample low-end response
- Precision 3-way crossover balances sound across the frequency range
- Up to 40 dB noise attenuation supports focused stage monitoring
- Cardioid microphone suits vocals, drums, guitar cabinets, piano, strings, and brass
- Switchable 100 Hz low-cut and 20 dB pad handle varied sources
Couldn't load pickup availability
What's Included in the box
- MP-360 triple balanced armature professional in-ear monitors
- Durable hard case
- Foam, silicone, wide-bore silicone, and triple-flange ear tips (S/M/L)
- Additional cable with inline remote
- Cleaning cloth
- 1/4-inch adapter
- Tip Tips guide
- X1 A cardioid condenser microphone
- Swivel microphone clip
- Mic stand thread adapter
SKU: SKU: MP-360+X1 A
View full details















Product Description
Features
Clear Stage Monitoring
Triple balanced armature drivers and a precision 3-way crossover balance the frequency range, helping performers hear vocals and low-end detail on stage.
Comfortable Sound Isolation
A low-profile molded enclosure and noise attenuation up to 40 dB support a comfortable fit and help limit outside sound during performances.
Broad Recording Uses
The cardioid condenser microphone suits vocals, drums, guitars, room capture, piano, strings, woodwinds, and brass, covering common home studio sources with one mic.
Source-Specific Controls
Switchable 100 Hz low-cut and 20 dB attenuation help manage bass buildup and louder sources, while 48 V phantom power supports standard studio use.
Ready For Sessions
An additional cable with inline remote, cleaning cloth, hard case, microphone clip, and stand thread adapter cover key setup, care, and storage needs.
Technical Specifications
- Product Type In-Ear Monitors and Cardioid Condenser Microphone Bundle
- Monitor Driver Type Triple Balanced Armature
- Monitor Impedance 13.5O*
- Monitor Sensitivity 108dB/1mW*
- Monitor Frequency Response 20 Hz to 20 kHz
- Noise Attenuation Up to 40 dB
- Monitor Cable Connector Detachable MMCX cable with swivel
- Included Ear Tips Foam, silicone, wide-bore silicone, triple flange (S/M/L)
- Microphone Capsule 2/3" back-electret condenser
- Microphone Electrical Impedance Less than 50 Ohms
- Microphone Recommended Load Impedance Greater than 1k Ohms
- Connectivity 3-pin male XLR connector
- Powering 48V Phantom Power (P48 according to IEC 61938)
- Microphone Polar Pattern Cardioid
- Microphone Frequency Range 20 Hz to 20 kHz
- Microphone Sensitivity 20 mV / Pa (-34 dBV)
- Microphone Max SPL 130 / 150 dB (0 / 20 dB pad, 0.5% THD at 1 kHz)
- Microphone Equivalent Noise Level 16 dB
- Microphone Dynamic Range 114 / 134 dB (0 / 20 dB attenuation pad)
- Microphone Signal to Noise Ratio 78 dB
- Microphone Low-cut Filter 100 Hz, 6 dB / Oct, switchable
- Microphone Attenuation Pad 20 dB, switchable
- Microphone Current Consumption 4.0 mA
- Microphone Weight 390 g (13.76 oz.)
- Microphone Dimensions 58 mm diameter, 169 mm length (2.28 in., 6.65 in.)