TN12-02 2-Pack
MTX
TN12-02 2-Pack
TN12-02 2-Pack
12" Car Subwoofers, 200W RMS Each, 2 Ohm, Set Of 2
Free Shipping
Features
- Two matched TN12-02 12" subwoofers, 200W RMS each
- 400W peak power handling per sub, 800W peak combined
- 2 ohm impedance suited to mono amplifier setups
- ALDS suspension geometry for controlled, linear cone travel
- Spider Plateau Venting cools the voice coil under sustained bass
Couldn't load pickup availability
What's Included in the box
- (2) MTX Terminator TN12-02 12" Car Subwoofers
SKU: SKU: (2) TN12-02
View full details










Product Description
Each TN12-02 uses MTX's ALDS suspension geometry, which pairs a flat progressive spider with an extended pole piece to keep the cone moving in a controlled, linear, piston-like motion instead of wobbling off-axis at higher excursion. Spider Plateau Venting targets cool air directly at the voice coil, an area that runs hottest under sustained bass, so the subs can play loud for longer without the thermal compression that causes output to fade. A rubber surround adds durability over the stiffer foam used on cheaper subs, holding up to repeated flexing over years of use.
At 2 ohms with a 24Hz-160Hz frequency response, this pair is built for a mono amplifier setup where low impedance means more available power. A recommended 100-200W RMS per sub keeps the pairing straightforward for anyone matching an amplifier to the load. Whether mounted in a sealed 1.25 cubic foot enclosure or a vented 2.0 cubic foot box, the TN12-02 pair delivers the tight, hard-hitting low end MTX subwoofers are known for.
Features
A Matched Pair, Not A Mismatch
Buying two identical subs at once means both drivers perform the same way in a dual-sub enclosure, avoiding the uneven bass that comes from mixing subs of different ages.
Controlled Cone Travel At High Power
The ALDS suspension geometry keeps the cone moving in a straight, piston-like path instead of wobbling off-axis as excursion increases.
Cooler Coils, Longer Play Time
Spider Plateau Venting routes cool air directly at the voice coil, delaying the thermal compression that causes bass output to fade during long sessions.
Built For A Mono Amplifier
At 2 ohms combined, this pair is sized for a mono amplifier setup where lower impedance unlocks more available power.
Durable Rubber Surround
A rubber surround resists the cracking and stiffening that foam surrounds develop over years of flexing
Technical Specifications
- Product Type Car Subwoofers, Set Of 2
- Subwoofer Size 12 in
- RMS Power Handling 200W Per Sub
- Peak Power Handling 400W Per Sub
- Impedance 2 Ohm
- Recommended Amp Power 100W - 200W RMS
- Frequency Response 24Hz - 160Hz
- Sensitivity 86.4 dB
- Voice Coil 1.50 in
- Mounting Depth 5.44 in
- Cut Out Diameter 11.08 in