Skip to product information
1 of 24

MTX

(2) MTX S6510-44 10" Square Subwoofers + Polk Audio Amplifier + Amp Kit

(2) MTX S6510-44 10" Square Subwoofers + Polk Audio Amplifier + Amp Kit

10" Square Subwoofers, 500W RMS Each, With Mono Amplifier And 2-Gauge Wiring Kit

Free Shipping

Regular price $699.90
Sale price $699.90 Regular price $1,079.85
Save 35%
Shipping calculated at checkout.
Features
    • Two S6510-44 10" square subs rated 500W RMS / 1000W peak each
    • Patented square surround geometry increases Xmax and volume displacement
    • Spider Plateau Venting and radial ribbed T-yoke manage heat under load
    • PAD1000.1 mono amp outputs up to 1200W RMS at 1 ohm
    • RWK21 kit includes 2-gauge power cable and 100% copper RCAs
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • (2) MTX S6510-44 10" Square Subwoofers
    • (1) Polk Audio PAD1000.1 Mono Amplifier
    • (1) Rockville RWK21 2-Gauge Amp Installation Kit

SKU: SKU: AS-(2) S6510-44+PAD1000.1+RWK21

View full details

Product Description

This bundle pairs two MTX S6510-44 10" square subwoofers with a Polk Audio PAD1000.1 mono amplifier and a Rockville RWK21 2-gauge wiring kit, giving you everything needed to add serious low end to a car audio system in one purchase. The square design gives each S6510-44 more cone surface area than a round 10" driver, and the patented surround geometry increases Xmax for greater volume displacement and higher SPL. Dual layer cooling, including Spider Plateau Venting and a radial ribbed T-yoke, pulls heat away from the voice coil so the pair can run hard during long listening sessions without breaking down.

The PAD1000.1 drives both subs with 500W RMS at 4 ohms, up to 1200W RMS at 1 ohm, using a Class D MOSFET design that stays cooler than older amplifier topologies. A variable low-pass filter, subsonic filter, and remote bass level control let you dial in the crossover point and boost from the driver's seat instead of reaching under a seat or into the trunk.

The RWK21 kit closes the gap between amp and subs with 2-gauge SuperFlex power and ground cable, 100% copper twisted-pair RCAs, an 18-gauge remote wire, and a 150-amp ANL fuse holder, plus the terminals, ties, and split loom needed for a clean, complete install. Nothing extra to source: subs, amplifier, and wiring arrive ready to mount, wire, and tune.

Features

    • More Cone Area, More Bass

      The square S6510-44 design packs more surface area into the same mounting space than a round 10" sub, translating to higher SPL and volume displacement.

    • Runs Cool Under Pressure

      Spider Plateau Venting and a radial ribbed T-yoke pull heat off the voice coil and back plate so the subs keep performing during long, high-volume sessions.

    • Dedicated Mono Power

      The PAD1000.1 delivers up to 1200W RMS at 1 ohm with a Class D MOSFET design that runs cooler than conventional amplifiers.

    • Dial In The Sound From The Seat

      A remote subwoofer level control and variable low-pass and subsonic filters let you adjust bass output without leaving the driver's seat.

    • One Wiring Kit, Full Install

      The RWK21 supplies 2-gauge power and ground cable, copper RCAs, and a 150A ANL fuse holder so the amp connects cleanly without buying separate parts

Technical Specifications

  • Product Type Subwoofer, Amplifier, And Wiring Kit Bundle
  • Subwoofer Size 10 in, Square, Dual Voice Coil
  • Subwoofer RMS Power 500W Per Sub
  • Subwoofer Peak Power 1000W Per Sub
  • Subwoofer Impedance 4 Ohm
  • Amplifier Type Class D MOSFET, Mono
  • Amplifier RMS Power (1 Ohm) 1200W
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov