Skip to product information
1 of 6
Used

PLANET AUDIO

Planet Audio Anarchy AC2600.2 2600 Watt 2 Channel Car Amplifier Amp + Remote

Planet Audio Anarchy AC2600.2 2600 Watt 2 Channel Car Amplifier Amp + Remote

2-Channel Class A/B Car Amplifier, 1300W Max Per Channel, 2600W Bridged, Wired Remote Bass Control Included

Free Shipping

Regular price $83.51
Sale price $83.51 Regular price $184.00
Save 54%
Shipping calculated at checkout.
Features
    • 2600W bridged at 4 ohms drives one subwoofer from a single channel
    • 300W RMS x 2 at 4 ohms for a full-range pair of speakers
    • MOSFET power supply keeps the output stage fed under heavy load
    • Variable 0 to 18 dB bass boost with included wired remote level control
    • 85 dB signal-to-noise ratio and 90 dB channel separation for clear output
30-Day Money-Back Guarantee
Fast & Free Shipping
Buy Now, Pay Later
    • Anarchy AC2600.2 2-Channel Car Amplifier
    • Wired Remote Bass Level Control

SKU: SKU: AC2600.2 U

View full details

Product Description

The Planet Audio Anarchy AC2600.2 is the largest amplifier in the Anarchy two-channel lineup, built for systems where one subwoofer needs to do the heavy work. It produces 300W RMS per channel at 4 ohms, 1300W max per channel at 2 ohms, and 2600W bridged into a single channel at 4 ohms, so the same amp can run a pair of full-range speakers or bridge down to mono for bass duty.

A MOSFET power supply keeps the output stage fed under load. Tuning is handled with a 45 Hz to 90 Hz low-pass filter for subwoofer output, a variable 50 Hz to 500 Hz high-pass filter for full-range speakers, and variable bass boost up to 18 dB. A switchable input sensitivity setting matches the amp to a factory head unit or an aftermarket deck, and the included wired remote mounts in the cabin so bass level changes take a second.

RCA low-level inputs cover aftermarket source units, while high-level speaker inputs let the amp work with a factory radio that has no preamp outputs. Frequency response runs 20 Hz to 20,000 Hz, signal-to-noise ratio measures 85 dB, and channel separation measures 90 dB. Thermal, overload, and short-circuit protection shuts the amp down if a speaker fails or the chassis gets too hot, then lets it come back once conditions are safe.

The chassis is 18" long, 10" wide, and 2.25" tall, so plan for a trunk amp board, a rear wall mount, or a false floor rather than an under-seat spot. Suited to a loud daily setup, a competition-style bass build, or a system with dual subwoofers wired to a 4 ohm bridged load.

Features

    • Headroom For Serious Bass

      Bridged output of 2600W at 4 ohms sends a single channel of power to one subwoofer, with 300W RMS per channel available for full-range use.

    • Steady Power Delivery

      A MOSFET power supply holds voltage to the output stage, so the amp keeps composure when the system runs loud for long stretches.

    • Set The Frequency Range

      A 45 to 90 Hz low-pass filter and a variable 50 to 500 Hz high-pass filter match output to subwoofers or smaller full-range speakers.

    • Bass Control In The Cabin

      The included wired remote plus variable bass boost up to 18 dB let you set low-end level from the seat instead of the trunk.

    • Clean Signal Path

      An 85 dB signal-to-noise ratio and 90 dB channel separation keep background noise down and channels distinct across the 20 Hz to 20,000 Hz range.

Technical Specifications

  • Product Type 2-Channel Car Amplifier
  • RMS Power Output 300W x 2 Channels @ 4 Ohm
  • Max Power Output 1300W x 2 Channels @ 2 Ohm
  • Bridged Power 2600W x 1 Channel @ 4 Ohm
  • Amplifier Class Full Range, Class A/B
  • Power Supply MOSFET
  • Low-Pass Filter 45 Hz to 90 Hz
California Proposition 65 Warning: Cancer and Reproductive harm — www.P65Warnings.ca.gov