Eris Pro 6

The Eris Pro 6 is a powered coaxial reference monitor for rooms that need more low end and level than a compact model provides. A 1.25-inch ultra-low-mass silk-dome tweeter sits at the center of a 6.5-inch woven-composite woofer, so both drivers radiate from a single point. That alignment produces a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns, which is why coaxial designs work well in Dolby Atmos rooms where speaker angles vary and in stereo rooms shared by more than one listener. Transient detail is high and dynamics stay natural, so long mix sessions are less tiring. The woven-composite woofer keeps bass tight rather than loose, and a ported enclosure with 140W of Class AB power reaches down to 35 Hz with 103 dB peak SPL at one meter. Acoustic tuning is thorough: Acoustic Space settings of flat, -2 dB, and -4 dB compensate for wall or corner placement, continuously variable high- and mid-frequency controls give plus or minus 6 dB at 10 kHz and 1 kHz, and a low-cut filter offers flat, 80 Hz, or 100 Hz at -12 dB per octave. Rear-panel inputs include balanced XLR and 1/4-inch TRS plus unbalanced RCA, so interfaces, mixers, and consumer sources all connect. Protection covers RF interference, output-current limiting, over-temperature, turn-on and turn-off transients, and subsonic content, and Power Saver mode engages after 40 minutes. Wall and ceiling mount provisions support stereo and multi-channel installations.